Operation Manual

8
BEFORE CALLING FOR SERVICE
The condition shown in the below left-hand column does not necessarily indicate
functional faults of the terminal. Please check the listed items at the right-hand column
“Checking” before calling for service.
The following options are available for your POS terminal:
Do not try to install options yourself.
For details, contact your authorized SHARP dealer.
Condition Checking
The power indicator is not lit.
•IsACpoweravailableattheelectricaloutlet?
•IstheACplugoftheAC/DCadapter
connectedtotheelectricaloutlet?
•IstheACpowercorddisconnectedor
looselyconnectedtotheAC/DCAdapter?
•IstheACadaptersDCpowercable
connected to the DC inlet Jack of the POS
terminal?
•Isthepowerswitchoftheterminalturned
“ON”?
LIST OF OPTIONS
1.
Magnetic card reader model RZ-X6MR1
2.
2 line rear customer display model RZ-X6DP1
3.
Remote drawer models ER-03DW/04DW/05DW/03DWB4/05DWB5
4.
The ER-48CC3 till is used for the ER-03DW/03DWB4
5.
The ER-48CC2 till is used for the ER-04DW
6.
The ER-58CC till is used for the ER-05DW/05DWB5