Specifications

F
S
V
I
N
P
E
E
E-50
SD-AS10W_EX_E.fm05/3/18
ENGLISH
TINSZA124AWZZ
SD-AS10W
Advanced Features
- Setting the timer -
1
Turn on the unit, and press the TIMER/SLEEP/CLOCK button.
2
Within 10 seconds, press the or button to select "ONCE TIM-
ER" or "DAILY TIMER", and press the ENTER button.
Once timer Daily timer
3
Within 10 seconds, press the or button to select "ONCE SET"
or "DAILY SET", and press the ENTER button.
Once timer Daily timer
4
Press the or button to adjust the hour and
then press the ENTER button.
5
Press the or button to adjust the minutes
and then press the ENTER button.
6
Set the time to finish as in steps 4 and 5 above.
7
Switch the input with the or button, and then press the ENTER
button.
! Available playback sources: DVD/CD, TUNER, DIGITAL 1, DIGITAL 2, TV
and VCR.
! If you select DIGITAL 1, DIGITAL 2, TV or VCR, connect the unit to the cor-
responding equipment and set the timer.
When you select "TUNER", select a station by pressing the or but-
ton, and then press the ENTER button.
! If a station has not been programmed, "NO P.SET"
will be displayed and timer setting will be cancelled.
Preset channel num-
ber
8
Adjust the volume with the or button and
press the ENTER button.
Do not set the volume too high.
9
The following appear and the setting for each item is displayed.
Once timer Daily timer
10
Press the ON/STAND-BY button to enter the power stand-by
mode.
! The unit enters the timer stand-by mode.
(The timer set indicator lights up. See page 51.)
! The timer setting is retained.
4
SHARP TINSZA124AWZZ (W)