SD-AT1000W(LAG) TINSEA121AWZZ ENGLISH Please refer to pages E-1 to E-32. ESPAÑOL 1-BIT DIGITAL HOME THEATER SISTEMA 1-BIT PARA HOME THEATER Consulte las páginas S-1 a S-32.
ENGLISH SD-AT1000W ENGLISH Introduction Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. ! SD-AT1000W 1-Bit Digital Home Theater consisting of SD-AT1000W (main unit), CP-AT1000WF (front speakers), CP-AT1000WC (centre speaker), CP-AT1000WR (surround speakers) and CP-AT1000WSW (subwoofer).
SD-AT1000W(LAG) TINSZA121AWZZ Accessories Precautions Please confirm that the following accessories are included. " General 2 SD-AT1000W ENGLISH 1 ! Please ensure that the equipment is positioned in a well ventilated area and that there is at least 10 cm (4") of free space along the sides and back. There must also be a minimum of 15 cm (6") of free space on the top of the unit.
SD-AT1000W ENGLISH Controls and indicators " Main unit (front panel) 1 - Controls and indicators - General Information 6 2 3 4 5 (1) (2) (3) (4) (5) (6) (7) 15 (1) (2) (3) (4) (5) (6) (8) (9) (10)(11) 7 (12) (13) 9 8 10 11 12 13 Reference page 1. Sleep Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2. FM Stereo Receiving Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3. Timer Play Indicator . . . . . . . . . . . . . . .
SD-AT1000W ENGLISH " Main unit (rear panel) 1 2 3 4 6 5 1 7 2 9 10 11 The rating label is located on the bottom of the unit. Reference page 1. FM 75 Ohms Aerial Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 2. Aerial Earth Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 3. AM Loop Aerial Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 4. Coaxial Digital Audio Input Socket . . . . . . . . . . . .
SD-AT1000W Controls and indicators (continued) ENGLISH " Remote control 1 2 3 Reference page 12 13 - Controls and indicators - General Information 14 4 5 15 16 6 17 7 18 8 19 9 20 10 21 1. Remote Control Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 2. TV Operation Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 3. VCR Operation Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 4.
SD-AT1000W ENGLISH It is possible to operate some functions of Sharp TVs, VCRs and DVD players with your new SD-AT1000W remote control. However some models may not respond. TV Operation Buttons DVD Operation Buttons 1 4 1 7 5 2 8 3 9 4 10 5 11 6 12 2 6 5 TV CHANNEL Switches up the TV channels. 6 TV VOLUME + Turns up the TV volume. 1 DVD 7 Selects the DVD menu. 2 DVD RETURN Goes back to the previous screen. 3 DVD ENTER Validates the menu. 8 9 DVD MENU Displays the DVD menu.
SD-AT1000W Controls and indicators (continued) ENGLISH " Front speaker 2 " Surround speaker 2 1 1 3 3 2 4 4 - Controls and indicators - General Information 2 1. Bass Reflex Duct 2. Speakers 3. Speaker Terminals 4. Mounting Holes for Stand or Bracket 1. Bass Reflex Duct 2. Speaker 3. Speaker Terminals 4. Mounting Holes for Stand or Bracket " Centre speaker 1 1 2 " Subwoofer 1 3 4 1 3 1. Bass Reflex Duct 2. Speakers 3. Mounting Holes for Bracket 4. Speaker Terminals 2 1.
SD-AT1000W " Speaker functions ENGLISH " Using antislip speaker cushions Reproduces left and right sound (for the stereo mode) or front surround sound. You can install the front, centre or surround speakers either vertically or horizontally. Affix the cushions (supplied) to the bottom of the speakers to prevent them from sliding or falling due to vibration. Centre speaker: (Vertical position) Front speaker: 1 2 (Horizontal position) Reproduces centre surround sound.
SD-AT1000W Speaker connection ENGLISH The speaker terminals on the main unit, the tube and plugs of the speaker lead, and speaker labels are distinguished by colours. Connect the speaker and the unit by matching the colours. (For speaker installation, refer to page 15.
SD-AT1000W(LAG) TINSZA121AWZZ Aerial connection SD-AT1000W ENGLISH Supplied FM aerial: Make sure to leave the AC power lead disconnected when connecting the speakers. To prevent accidental short circuit between and speaker wires to the speakers first then to the unit. terminals, connect the Connect the FM aerial wire to the FM 75 OHMS socket and position the FM aerial wire in the direction where the strongest signal can be received.
SD-AT1000W Digital audio cable (commercially available) " Connecting a VCR, etc. Audio cable (commercially available) To coaxial digital audio input socket To audio output sockets To optical digital audio input socket Optical digital cable Digital tuner, etc. (commercially available) TV Audio signal To optical digital audio output socket TV To audio input sockets Audio signal System connections " Connecting a DVD player (CD player), digital tuner, etc.
SD-AT1000W 2 To audio output sockets To audio input sockets Commercially available subwoofer (amplifier built in) TV Audio signal Audio cable (commercially available) To subwoofer output socket Subwoofer signal To subwoofer input socket Audio cable (commercially available) To audio input sockets Other equipment Audio signal Audio cable (commercially available) 1 For a greater emphasis of bass, a commercially available subwoofer, with a built in amplifier, can be connected to the unit using
SD-AT1000W Connecting the AC power lead ENGLISH After checking all the connections have been made correctly, plug the AC power lead of this unit into the wall socket. " To turn the power on - Connecting the AC power lead - System connections Wall socket (AC 220 - 240 V, 50/60 Hz) Press the ON/STAND-BY button. If the power does not turn on, check the AC power lead is plugged in properly. To set the unit to stand-by mode: Press the ON/STAND-BY button again.
Setting the AM/FM interval SD-AT1000W ENGLISH The International Telecommunication Union (ITU) has established that member countries should maintain either a 10 kHz or 9 kHz interval between broadcasting frequencies of AM stations and 100 kHz or 50 kHz for FM stations. The illustration shows the 50/9 kHz zones (regions 1 and 3), and the 100/10 kHz zone (region 2). This product is not equipped with a span selector.
SD-AT1000W ENGLISH System installation " Placing the speaker system Notes: The best surround effect will be achieved by placing each speaker at the same distance from the listening position. It is recommended to arrange the speakers as shown below. Front speaker (left) Centre speaker Front speaker (right) ! ! ! ! Place the TV halfway between the front speakers. It is recommended that the centre speaker be placed near the television.
Remote control SD-AT1000W ENGLISH " Battery installation " Test of the remote control 1 Open the battery cover. 2 Insert the batteries according to the direction indicated in the battery compartment. Check the remote control after checking all the connections (see pages 9 - 13). Point the remote control directly at the remote sensor on the unit. When inserting or removing the batteries, push them towards the nals. battery termi- 3 Close the cover.
SD-AT1000W General control ENGLISH " To change the display brightness (2 levels) You can switch the display brightness by pressing the DIMMER button. Display Dimmed " Volume control Main unit operation: When the VOLUME control is turned clockwise, the volume will increase. When it is turned anticlockwise, the volume will decrease. 0 1 2 ..... 39 40 Press the VOLUME + button to increase the volume and the VOLUME - button for decreasing.
SD-AT1000W(LAG) TINSZA121AWZZ Setting the clock SD-AT1000W ENGLISH By setting the unit to the correct time, you can use it not only as a clock but also for timer playback. 4 3 1 Press the or button to adjust the hour and then press the ENTER button. 2 ! Press the or button once to advance the time by 1 hour. Hold it down to advance continuously. ! When the 12-hour display is selected, "AM" will change automatically to "PM".
SD-AT1000W ENGLISH Listening to the radio " Manual or Auto tuning 1 Press the ON/STAND-BY button to turn the power on. 2 Press the TUNER (BAND) button repeatedly to select the desired frequency band. FM monaural FM stereo 3 Press the TUNING ( or AM ) button to tune in to the desired station. Press the TUNING button as many times as required to tune in to the desired station. - Listening to the radio - Basic Operation Manual tuning: Auto tuning: When the TUNING button is pressed for 0.
SD-AT1000W " Memorising a station You can store 40 AM and FM stations in memory and recall them at the push of a button. (Preset tuning) Perform steps 1 - 3 in "Manual or Auto tuning" on page 19. 1 2 Press the TUNER PRESET ( or tion. 2 Within 5 seconds, press the TUNER PRESET ( or ) button to select the preset channel number. Within 5 seconds, press the ENTER button to store that station in memory.
SD-AT1000W Listening to the playback sound from DVD players, VCRs, etc. ENGLISH Basic Operation - Listening to the playback sound from DVD players, VCRs, etc. - 1 2 3 Turn on the connected equipment. Press the ON/STAND-BY button to turn the power on. Select the source by pressing the DIGITAL or LINE button repeatedly. DIGITAL 1 DIGITAL 2 LINE 1 LINE 2 LINE 3 You can select the source directly on the remote control. 4 5 Press the play button of the connected equipment.
Enjoying various sounds SD-AT1000W ENGLISH DTS (Digital Theater Systems) Dolby Digital 1 Dolby Pro Logic Inputs from stereo-recorded discs, video tapes, etc. 2 When playing stereo discs/videos or 2-channel stereo sounds recorded in Dolby Digital, the Dolby Pro Logic function reproduces the sound in 5.1-channel digital surround sound, ensuring more natural sound effects. One of the digital audio systems for theatrical use. As the One of the digital audio systems for theatrical use.
SD-AT1000W Enjoying various sounds (continued) ENGLISH " Listening to sounds with multi-channel (5.1 ch, etc.) When connecting the DVD player to the DIGITAL IN 1/2 sockets, you can enjoy Dolby Digital or DTS sounds with spacious effects. You can also enjoy spacious effects when listening to 2-channel stereo sounds using Dolby Pro Logic . Whilst the disc is playing, press the MULTI CHANNEL button. - Enjoying various sounds - Basic Operation A maximum of 5.
SD-AT1000W ENGLISH " Listening to 2-channel stereo sounds Whilst the disc is playing, press the STEREO button. You can enjoy the great acoustic effects of the front speakers and subwoofer. Notes: ! If "STEREO" or "SURROUND" is selected, the " " indicator goes out. ! Some discs are recorded at 96 kHz of sampling frequency. When this type of disc is played, the sound mode is changed to "STEREO" automatically. The sound mode cannot be changed during playback.
SD-AT1000W Adjusting speaker delay/speaker level ENGLISH When speakers cannot be placed at equal distances, change speaker settings to enjoy surround effects as if they were equally placed. Step 1. Speaker delay setting Example: By adjusting speaker delay, differences in speaker distance can be corrected. This offers you the sound quality as if the speakers are installed at the same distance from the listening position.
SD-AT1000W(LAG) TINSZA121AWZZ 5 SD-AT1000W ENGLISH Step 2. Speaker level setting Step 3. Test tone If sounds from the speakers are uneven, you can equalise them by adjusting the speaker levels. After adjustments, check the speaker sound by listening to the test tone. (You can readjust the volume level.) 2 Within 10 seconds, press the speaker.
SD-AT1000W Timer and sleep operation ENGLISH You can use the unit as an alarm clock by setting the timer. - Timer and sleep operation - Advanced Features Before setting timer: 1 Set the unit to the correct time (page 18). If it is not set, you cannot use the timer function. 2 Prepare the sound source for playback. 3 Store radio stations (page 20). " Setting the timer 1 Turn the power on and press the TIMER button. Set the unit to the correct time if "TIMER STANDBY" does not appear.
SD-AT1000W ENGLISH After completing the setting 1 To check the timer setting: 1 Whilst in the timer playback stand-by mode, press the TIMER button. When the timer setting is completed: 2 The unit is in the timer playback stand-by mode. 2 Within 10 seconds, press the or button to select "TIMER CALL", and press the ENTER button. The unit returns to the timer playback stand-by mode after the setting contents are displayed in order. Playback starts automatically and the volume increases gradually.
SD-AT1000W Timer and sleep operation (continued) ENGLISH " Setting the sleep timer You can set the unit to the power stand-by mode at the specified time. 1 To confirm the remaining sleep time: 1 2 Whilst "SLEEP" is indicated, press the TIMER button. Within 10 seconds, press the or button to select "SLEEP". During playback, press the TIMER button.
Troubleshooting chart SD-AT1000W Symptom No sound is heard. Possible cause ! Is the volume level set to "0"? ! Are the headphones connected? ! Are the speaker wires disconnected? Reference page P. 17 P. 17 P. 9 ! Are the speaker leads connected to the wrong channels? P. 9 P. 15 Noise is heard during playback. ! Is each speaker placed at the same distance from the listener? ! Are speakers adjusted to the same level? ! Move the unit away from any computers or mobile phones.
SD-AT1000W Troubleshooting chart (continued) Error indicators and warnings ! If trouble occurs When you fail to perform operations properly, the following messages are displayed on the unit. ENGLISH References - Maintenance / Error indicators and warnings / Optional accessory - When this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is operated incorrectly, it may malfunction.
Specifications SD-AT1000W ENGLISH Frequency range Audio input terminals Audio output terminals Dimensions Weight RMS: 100 W (10 % T.H.D., 1 kHz) Surround speakers: RMS: 200 W (100 W + 100 W) (10 % T.H.D., 1 kHz) Subwoofer: RMS: 100 W (10 % T.H.D.
MEMO/MEMORÁNDUM SD-AT1000W_LAG_memo1 TINSZA121AWZZ
MEMO/MEMORÁNDUM SD-AT1000W_LAG_memo2 TINSZA121AWZZ
SHARP CORPORATION 0401_B5 TINSZA121AWZZ 04G R HK 1 SD-AT1000W_LAG_BACK TINSZA121AWZZ
