Specifications

Maxiva UAX
October 17, 2013
3‐45
888‐2693‐004 WARNING:Disconnectprimarypower priortoservicing.
Copyright©2013,HarrisBroadcast
Figure 3-43 LPU ISDB-T Setup Screen 3
Figure 3-44 LPU ISDB-T Setup Screen 4
Table3‐32XmtrHome>ExciterHome>Setup>ISDB‐TModulator>Nextx2(screen3)
Fields Explanation
NetworkID Choicesar
eDisableorEnable.
TransportStr
eamID ChoicesareDisableorEnable.
Channel(14‐69) Choicesar
eDisableorEnable.
VirtualCh
annel ChoicesareDisableorEnable.
Restamp Choicesar
eDisableorEnable.
State Enterva
lueinbox.
MicroRe
gion Entervalueinbox.
Table3‐33XmtrHome>ExciterHome>Setup>ISDB‐TModulator>Nextx3(screen4)
Fields Explanation
TestPattern
SingleTone&StopTest
PressingtheSingleTonesoftkeyinthetestpatternsubwindowcausesasingletone,placedat
thecenterofthespectrum,tobetransmitted.Itisusedtomeasurethechannelcarrier
frequency.Thesingletonesignalisthesamepowerastheex
citerisputtingoutnormally.
NormaltransmissionisresumedbypressingtheStopTestsoftkey .