Specifications

Section-5 Maintenance
October 17, 2013
5‐46
Copyright©2013,HarrisBroadcast
WARNING:Disconnectprimarypower priortoservicing. 888‐2693‐004
Figure 5-28 System Setup Screen - left Remote Comm Ethernet Screen - right
5.9.8 LPUISP(In‐SystemProgramming)
UpdatingtheLPUsoftwareisaccomplishedbyaccessingtheISPscreenviawebbrowserPCconnection.Connection
totheLPUviathefrontEthernetport isrecommended.TheLPUsoftwarefilemustbestoredonthe PCbefore
commencingtheupdateprocedure.UsethefollowingproceduretoupdatetheLPUsoftware:
STEP 1
RefertoMainSetupscreenFigure3‐30onpage3‐30.
STEP 2 SelectsoftkeyISP.
Figure 5-29 ISP Screen
STEP 3
UsetheBrowsebutton(showninFigure5‐29)tolocateandselectthenew
softwarefi
le,selecttheSubmitsoftkeytoactivatetheupload.LPUsoftware
filestypicallyhavea.s19extensionandthemodulationtypeisidentifi edin
thefilename.ForexampleAPEXM2X_DVB_REVR.s19wouldbeanLPU
softwarefileforDVBTmodulationandtherevisionlevelisR.Thescreenin
Figure5‐30(le
ft)willappearwhilethefileisuploading.
Note
The number of bytes received value should be increasing during the file upload.