Specifications

Section-5 Maintenance
October 17, 2013
5‐52
Copyright©2013,HarrisBroadcast
WARNING:Disconnectprimarypower priortoservicing. 888‐2693‐004
STEP 11 UponcompletionoftheSubmitprocessthe[Program]boxwilldisplay(see
Figure5‐33onpage5‐49).
STEP 12 Select[Program].Theaddressbardisplaywillchangeto192.168.117.88/
Program.
STEP 13 Afterabout5minutesthedisplaywillchangetoreadProgrammingFlash&
LPUReboots.WaitfortheLPUreboottooccur(LEDsonfrontwillblinkand
fanswillslow)thenclosethebrowsersession.
STEP 14 Proce dur ecomplete.
5.9.10 SavingandRecallingLPUSettings
TheSaveSettingssoftkeycanbeusedtosaveacopyofthecurrentusersettingsstoredinEEPROMintheLPU.All
settingswiththeexceptionofthefrontandrearMACaddressesandfeaturekey ,areincluded.Thiscanbeusefulfor
restoringasystemtoknownuserset
tings.
Caution
THE EEPROM DATA DOES INCLUDE CALIBRATION DATA, SO IF USER
SETTINGS ARE BEING COPIED OVER ONTO A SECOND SYSTEM, THE
CALIBRATION DATA WILL BE COPIED OVER AS WELL, THUS CORRUPTING
THE CALIBRATIONS OF THE TARGET SYSTEM. THE POWER READINGS ON
THE TARGET SYSTEM WILL BE INACCURATE UNTIL THEY ARE
RECALIBRATED.
TosavethecurrentEEPROMsettings,selecttheSaveSettingssoftkey.Anewbrowsertabwillopenshowingthe
EEPROMfileintextformat.Tosavethefile,fromtheSavesettingsdatapage,selectFile>Sa vePageAs
Figure 5-39 Settings File Window
Choosewher
etosaveEEPROMfile,andnamethefileasdesired.Makesurethefileextensionis‘.s19’