Specifications

Maxiva UAX
October 17, 2013
5‐53
888‐2693‐004 WARNING:Disconnectprimarypower priortoservicing.
Copyright©2013,HarrisBroadcast
Figure 5-40 Save Settings File Window
Inor
dertorestorethesettingspreviouslysavedinthefile,followtheprocessdescribedin"5.9.10Savingand
RecallingLPUSe
ttings"onpage5‐52.Usethefilesavedinthepreviousstepasthefiletoupload.
5.9.11 LPUScreenCaptures
LPUGUIscreenscaneasilybecapturedusingtheAlt‐PrintScreenkeysonatypicalWindowsPC.Theprocedureis
asfollows.
STEP 1
ConnectacomputertotheLPU.
STEP 2 Selectthescreentobecaptured.
STEP 3 PressandholdtheAltkeywhilepressingtheprintscreenkey .
a.
EarlierWindowsprogramscopiedthecapturedscreentotheclipboard.
b. TheWindowsXPoperatingsystemopensawindowofferingmanychoicesinclud‐
ingco
pyingthecapturedscreentotheclipboardorsavingitasafiletoaspecified
directory.
STEP 4
Itmaybenecessarytochangethecomputerscreenresolutionifaportionof
theLPUGUIscreeniscutoffwhenitiscaptured.
STEP 5 Ifdesired,thecapturedscreenmaybeedited,usingausersuppliedprogram,
toremovetheundesiredinformationwhichsurroundsthecapturedscreen.
STEP 6 Procedurecomplete.
5.9.12 ChangingDateandTimeBattery
AbatteryisusedtoretainthetimeanddatesettingswhenmainspowerisremovedfromtheLPU.Thetimeand
dateinformationisusedintheLPUfaultlog.Thebatteryshouldbereplacedonaregularschedule(yearlyis
recommended).
STEP 1
RemoveACmainspowerfromtheLPU.
STEP 2 IftheLPUisinstalledinarack,removeitandsetitonabench.
STEP 3 RemovetheLPUtopcover.
STEP 4 Removetheoldbatteryandinsertanewbatterywithpositivesideup.
• Batteryslidesoutfromundertheclip.
• SeeFigure5‐41forbatterylocation.
STEP 5
ReplacetheLPUtopcoverandremountunitinthetransmitter.
STEP 6 Continueontothenextsectiontosetthetimeanddate.