Specifications

Section-5 Maintenance
October 17, 2013
5‐66
Copyright©2013,HarrisBroadcast
WARNING:Disconnectprimarypower priortoservicing. 888‐2693‐004
Figure 5-49 PA Module (cover removed, numbers refer to steps)
STEP 3
RemovetwoPhillipspanheadscrewsfromtheRFoutputconnectormount
ontheoutputsideofthemodule.Thesescrewsat tachthroughstand‐offson
themodulecase.Thesescrewsmustbereinstalledwithacaptivelockand
flatwasher.
STEP 4 RemovethreeAllenscrewsfromtheoutput(connector)sideofthecase.
Figure 5-50 PA Module Rear (top cover removed)
STEP 5
RemovefourAllenscrewsfromtheinput(handle)sideofthecase.
3
3
Case
Pallet
FET 2
FET 1
4
4
3