Specifications

Maxiva UAX
October 17, 2013
2‐11
888‐2693‐004 WARNING:Disconnectprimarypower priortoservicing.
Copyright©2013,HarrisBroadcast
STEP 2 ConnectaGPSantenna,1ppssignal,or10MHzref erence,asrequired,tothe
connectionpointslistedinFigure2‐3
STEP 3 Procedurecomplete.
2.9.5.1 OptionalAnalogInputs
TransmittersequippedwithanaloginputoptionshavethefollowingconnectionseitheronthecustomerI/Opanel
orontheLPU.
Figure 2-6 Optional Analog Inputs (LPU )
Table2‐2LPUandCustomerI/OTSInputs
LPU
Label
I/OPanel
Label
Connector
(female)
ATSC DVBT/CTTB/CMMB/
ISDBT
DVBTHierarchial
HPA 1BNC50 ASIPrimary ASIPrimary ASIHighPriorityPrimary
HPB2 BNC50 SMPTEPrimary ASIAuxiliary ASIHighPriorityAuxiliary
LPA LP1BNC50 ASIAuxiliary Notused ASILowPriorityPrimary
LPBLP2BNC50 SMPTEAuxiliary Notused ASILowPriorityAuxi liary
Table2‐3ReferenceInputs
Type Connector(female) Label
Analog,Digital BNC‐50(oncabinettop)
SMA‐50(onLPUrear)
GPS(antenna)
Analog,Digital BNC‐50 1PPS
Analog,Digital BNC‐50 10MHZ(ref.freq.)
Table2‐4AnalogConnections
Type Connector(female) Label
Analog BNC‐75 ANALOGVIDEO
Analog BNC‐75 ANALOGVIDEOAUX
Analog BNC‐75 ANALOGAUDIOCOMP
Analog XLRConnector ANALOGAUDIOA
Analog XLRConnector ANALOGAUDIOB