User Manual

4
GETTING STARTED
POWER ON AND OFF
The power switch is located on the right side of the copier. When the
power switch is turned to the “ON” position, the message “WARMING
UP. PLEASE WAIT.” will appear in the message display. Warming
up takes about 3 minutes. Once the copier is ready, the message
display will change to “READY TO COPY.”, and the START key
indicator will light up, indicating that copying is possible.
If the copier has been programmed in the auditing mode, the
message “ENTER YOUR ACCOUNT NUMBER. -----” will appear
after warming up. Once a valid account number has been entered,
the message will change to “READY TO COPY.” and the START key
indicator will light up.
Power on and off
Power on
Power off
Downloaded from: http://www.usersmanualguide.com/