Specifications

12
MAKING COPIES
USING THE MANUAL FEED TRAY (special paper)
The manual feed tray is used to copy onto transparency film, labels,
tracing paper, and other special purpose papers. Up to 50 sheets of
standard copy paper can be set in the manual feed tray.
●
Automatic duplex copying will not work when a non-standard sized
paper is used. If a duplex copying mode is selected and a non-
standard sized paper is used from the manual feed tray, the
corresponding one-sided mode will be selected automatically when
the START key is pressed. (Automatic duplex copying can be
performed only when an optional duplex module is installed.)
1
Place the original face down on the document glass and
close the document cover.
2
Open the manual feed tray.
3
Set the manual feed tray guides to the width of the copy
paper.
●
Be sure to extend the tray when feeding 8-1/2" x 14" or 11" x 17"
paper.
4
Insert the copy paper all the way into the manual feed
tray.
●
Transparency film, labels, tracing paper, and other special
purpose papers must be fed individually.
●
Up to 50 sheets of standard copy paper measuring from 5-1/2"
x 8-1/2" to 11" x 17" can be loaded into the manual feed tray.
●
When adding paper, first remove remaining paper, combine it
with the paper to be added and then reload as a single stack.
5
Use the TRAY SELECT key to select the manual feed
tray.
6
Leave the copy quantity at 0 if using special papers.
Enter the number of copies if using standard copy
paper.
7
Press the START key.
Using the manual feed tray (special paper)
POWER SAVE
START
GINAL PAPER
SIZE
17
14
11
11
11
×
×
×
×
×
EXTRA
TO PAPER
LECT
TRAY SELECT
8
1
/ 2
8
1
/ 2
8
1
/ 2
8
1
/ 2
5
1
/ 2
Downloaded From ManualsPrinter.com Manuals