Specifications

27
STATUS INDICATORS
1
Open the toner collecting container cover.
2
Disengage and remove the container from the copier by
pushing downward and then pulling it out.
●
Toner cannot be reused. Do not transfer used toner to the toner
hopper.
●
Remove the cap from a new toner collecting container and use
it to cover the full toner collecting container.
●
Keep the full toner collecting container until the next regular
service call. Your authorized Sharp Service Technician will
collect the container for disposal.
3
Install the new toner collecting container by pushing it
down onto the spring-loaded tray and then allowing it to
move upward and click into place.
4
Close the toner collecting container cover.
Used toner disposal
USED TONER DISPOSAL
The toner collecting container full ( ) indicator will blink when the
toner collecting container is full.
The copier will stop and will not operate until a new toner collecting
container has been installed. Replace the toner collecting container
as described below.
Downloaded From ManualsPrinter.com Manuals