Specifications

59
ADF (SF-A17)/RADF (SF-A56)
ADF (SF-A17)/RADF (SF-A56)
OPTIONAL EQUIPMENT
3
Enter the desired number of copies.
●
The maximum number of copies in the two-sided copy mode is
50 for 8-1/2" x 11" and 8-1/2" x 11"R and 30 for 8-1/2" x 14" and
11" x 17" paper. If the specified number of copies exceeds the
above number, the copy quantity display will display the maximum
allowable number after copying starts. If an optional sorter is
installed, the display will change to 10 (SF-S18 and SF-S54N)
or 20 (SF-S15 and SF-S56) after copying starts (in sort mode).
4
Press the START key.
●
To cancel a copy run during duplex copying, press the CLEAR
ALL (
) key. Manually remove any copies remaining in the
duplex module following the procedure for removing misfed
paper from the duplex module. (See page 26.)
1-sided copies from 2-sided originals (SF-A56 only)
1
Adjust the original guides to the size of the originals and
set the originals face up in the document feeder tray.
2
Use the ORIGINAL TO COPY key to select .
3
Enter the desired number of copies.
4
Press the START key.
●
To cancel a copy run, press the CLEAR ALL ( ) key. Copying
will stop and the RADF will output any originals which have been
fed. Also, the number in the copy quantity display will be reset
to 0.
POWER SAVE
START
1
2
3
4
5
6
7
0
C
8
9
PRE-COUNT
ORIGINALS
APLE
RT
OUP
LIG
12
POWER SAVE
START
1
2
3
4
5
6
7
0
C
8
9
Downloaded From ManualsPrinter.com Manuals