OBSTRUCTION CONTENTS Congratulations on your purchase of the Sharp SF-7350 Copier. This model is designed to economically provide for all your basic copying needs in a limited amount of office space and with maximum operational ease.
A WORD ON COPIER INSTALLATION CAUTIONS Improper installation may damage the copier Please note the following during initial installation and whenever the copier is roved. 3 1. Be sure to use the rated power supply and to ground the copier. 2. Do not install the cooler in areas that are: ® damp or humid, & exposed to direct sunlight, ® extremely dusty, ® poorly ventilated, # subject to trammed temperature or humidity changes, eg., near an air conditioner or heater. 4.
A [\D\ 7 ORDINARY PARER SIZES OF COPY PAPER T * Automatic Feeding Using the Cassette Size A5 > (107 x 147) | | (512" x 81/2") ~ i eI 80g/m? [ Weight (15 1os) | @ibs) « Automatic Feeding Using the Optional Bypass sacker (Max. 50 sheets) B4 g 46 Size o7 x14ny (5127 x-1i2") Weight Size Weight * A4 x 1) is the maximum size for paper weighing between 104/ (28 Abs) fo 128g/n¢ (34 |bs ). SPECIAL PAPERS Special papers must be fed manually through the bypass. See gaps 11.
PART NAMES AND FUNCTIONS @ Manual bypass Overall Y0101 o Exit tray 9 Document caver Documented glass @ Front cover 9 Paper cassette @ Power switch @ Exit tray Finished copies (up to approx. 100 sheets) are deposited on the exit tray. € Document cover Set the original and close the document cover before annoying starts. € Document glass Place the original to be copied on the endearment glass.
m Upper half release lever @ Developer unit locking ravel @ one collecting container @ Automatic exposure @ Fusing lever: Developer unit . @ Developer unit strap @ Coriander unit adjustment switch Upper half release lever Lii to release the upper halt of the cope. Developer unit socking lever Pauli down 1o release the developer uni lock. Developer unit Pul cut for toner replenishment. Replace or singletree copying in red, blue, brow or green.
PART NAMES AND FUNCTIONS Operation panel @) AUTO exposure indicator Lights when AUTO exposure has been selected. €) AUTO/MANUAL exposure selector key Selects auto or manual exposure. € MANUAL exposure selector Adjusts the exposure level to give lighter or darker exposure, € COPY RATIO indicators One enlargement, one same size and two reduction indicators show copy radios. @ COPY RATIO defector key Press to select cne of four ratios.
@ COPY QUANTITY display D CLEAR ey € READY indicator COPY QUANTITY I @ steed indicator & one required indicator e @B Toner collecting container full indicator @ Developer Replacement Required indicator @ Maintenance indicator & “key pad € outspread key €8 Print bunion € READY indicator Copying is possible when the indicator is on. Initial settings @ Print button * Autocratic exposure Press lo start copying.
MAKING COPIES Void area s approx. 10 mm (38”) NORMAL . Turn the power switch @ on. Warm-up time Is approximately 45 seconds, Wait for the READY indicator &) to light before starting to copy. . Place the original face down on the document glass &. Align the original with the original size scale and close the document cover @. . Check the copy paper size. . Adjust the copy density. Copy density adjustment is not required for most originals in the autocratic exposure mode.
5. Set the number of copies. o ® One copy is made when the display QUANTITY ® Press the CLEAR key @ if & mistake is made, 6. Press the print button @. ® The COPY QUANTITY display @ wil decrease by 1 for each completed copy. * To stop in the middle of a multi-copy run, press the CLEAR key @ ® To repeat multi-copy runs with a different original of the same size, simply replace the original and press the print bunion @ again.
MAKING COPIES REDUCTION/ENLARGEMENT 1. Place the original on the document glass @ and close the document cover @. 2. Check the copy paper size. 3. Press the COPY RATIO selector key @ 1o select the desired copy ratio. Reduction copy ratios: 80%, 70% Examples: 80% reduction reduces a B4 original to A4 copy size. 70% reduction reduces an A4 original fc A6 copy size.
BYPASS (MANUAL FEEDING) The manual bypass @ can be used to feed OHP film, labels, tracing paper and other special purpose papers. For best results, use only Sharp recommended supplies. 1. Set the original. 2. Adjust the manual bypass guide @ 1o the copy paper width. 3. Insert the copy paper all the way into the bypass slot. & The bypass PAPER SELECT indicator € lights up and copying begins autocratically.
MAKING COPIES BYPASS (OPTIONAL BYPASS SACKER) With an optionally available bypass-sacker, up to 50 sheets of standard copy paper can be autocratically fed to the copier, In effect, this option provides multi-paper feeding capability, just as i the Copier had 2 paper cassettes instead of one. Top indicator line) 1+ Set the original. 2. Load up to 50 sheets of standard copy paper in the optional bypass sacker. & OHP films, labels, tracing paper, and other special purpose paper must be fed Individually.
TWO-SIDED COPYING Two-sided copes can also be made on the SF-7380 Copley by using the manual bypass @. 1. Pace the first original on the document glass € and make copy. ® The first copy can be made with paper either from the cassette € or the manual bypass @. 2. Replace the first original with the second original. @ Make sure that both the first and second originals are oriented the same way on the document glass €. 3.
MAKING COPIES COLOR COPYING SHARP color copy kits and developer units {sold separately} can be installed to allow copying of one color at a time. Multiple colors can be cooled on the same page by changing the color units and recopying the document. 1. Install the desired color developer unit. ® See the next page. 2. Set the original, select the desired copier settings, and press the print button €. 3. Change the color developer unit. Feed the copy face up from the manual bypass € to copy a second color. 5.
Replacing the developer unit 1. Open the front cover ©. 2. Pull the developer unit locking lever @ forward to unlock. 3. Pull the developer unit @ out slowly until it stops. ® When sliding 1he developer unit € in or out, make sure your hand is clear of the developer unit locking lever . 4. Hold the developer unit @) and lift it out carefully. » Unless you hold the developer unit strap @, the developer unit @ cannot be removed. * Lore the developer unit @ in the carrying case when not in use. 5.
LOADING COPY PAPER INTO THE CASSETTE To save space, this cooler has a unique adjustable front-loading cassette which removes easily for paper loading. [P} wil appear as a blinking indication on the COPY QUANTITY display @ when paper cassette @ is empty, whee paper has not peen fed correctly, or when the cassette is rot properly inserted. For best results, use only SHARP recommended paper. 1 paper reaming in the removed paper cassette €, missed paper is stuck in the cassette slot.
ARG SERER ADDING TON The toner required indicator (& blinks when toner is needed. The copier il stop. The goner required indicator @ may oink during long runs of copying multiple dark originals even though toner remains. f the indicator begins blinking, tum the power off and then on again. Additional toner will be supplied autocratically and the indicator will go out. Copying is possible — when the READY indicator @ lights again. e S 1. Open the front cover ©. 2.
ADDING TONER 4. Shake the toner bottle well and pour the toner evenly into the toner hopper. * The toner bottle contains enough toner for two complete refills {approx. 5,006 topless. When using & new toner bottle, pour in half of the toner and store the rest for future use. ® F Pour the toner into the toner hopper until it reaches the level where half the roller in the hopper is hidden.
REMOVAL | The cooler stops and the misdeed indicator @ blinks when 2 misdeed I occurs. If the paper becomes accidentally form when removing a misdeed, be sure 1o remove all pieces. After removing the misdoes, open and close the L front cover @ to cancel the misdeed indicator €. Be careful not to damage the photo conductive drum & or corona wires. 1. Open the front cover ©. 2. Press the upper half release lever @ to open the copier. 3. Carefully remove the missed paper.
USED TONER DISPOSAL When the indicator @ blinks, the toner collecting container s full. The copier will stop. 1. Open the front cover ©. 2. Push up the fixed cover securing the container and gently remove the full toner collecting container @ * Toner cannot be recycled. Do not transfer used toner to the toner hepper. @ Remove the cap from the new toner collecting container @ and cap the full toner collecting container @ ® Keep the full toner collecting container @ until the next regular service call.
| i DEVELOPER REQUIRED ¢ when the | % indicate 3 lights, the developer should be replaced. DEVELOPER REPLACEMENT SHOULD ONLY BE DONE BY A SHARP AUTHORIZED SERVICE TECHNICIAN. Call your Service Irenic as soon as possible, SERVICE REQUIRED % | indicator @ lights, service by & Sharp authorized Service Oa\[ your Service Genre a3 son &s possible.
USER MAINTENANCE Proper care of the copier is essential for clean sharp copies. Please take a few minutes to regularly clean your SF-73850 Copier. document glass and cover Sating or marks on the document glass € o document cover & will also be copied. Wipe the document glass @ and document cover @ with a soft, clean cloth, * |f necessary, dampen the cloth with water. Do not use thinner, benzene or similar volatile cleaning agents.
— ey Copier does not operate. ® Copier plugged in? ] Copies are too dark or too light. Blank copies. ; .ls original fare down on the document glass @7 installed? Copies smear if rubbed. ® Paper damp? —~ Plug the cooler into a grounded outlet. ® Power switch @ or? = Turn the power switch @ on. e Corona unit @ papergirl-» See page 22. ® Paper oo heavy? ——8ee page 3. Replace with dry copy paper. Be sure to sloe copy paper in a dry location.
COPIER TROUBLE? / paper used? | ;=1 See page 3. * Paper:” -Casselte© properly —Le Make sure the paper cassette @ Is firmly installed. See page 16, installed? ® Pisces of"paper inside copier? See page 19, Paper curled-or damp? ’ v copy paper flat in the wrapper in a dry location. See page 28, ® Document glass @, document cover €) or corona unit @ dirty? et Ancient regularly. See page 22, # Original smudged or blotchy? ® tithe indicator € on? —developer replacement require? See page 21.
Power on but copies not possible. # [s the READY indicator @ on?—] #15 . the indicator € — . blinking? L w5 the | 8Ar | indicator € Thinking? ~Copier still warming up. Wait a few minutes. —Toner required. See page 17. e-Misdeed has occurred. See peg 18, L—Toner collecting container @ is full. See page 20. Please contact your authorized Sharp Service Irenic immediately if the problem persists after checking the above. Self-Diagnostic Function An automatic self-diagnostic function is built into the SF-7350.
SUPPLIES AND STORAGE Standard SF-7350 supplies to be replaced by the user include copy paper and goner. For best copying results be sure to use only Sharp products. 1 . . Store SF-7350 supplies only in locations that are dry. at room temperature. not exposed to direct sunlight. clean. Store copy paper in the wrapper and lying flat. ® Paper stored in packages standing up or out of the wrapper may curl or become damp, resulting in paper misdeeds.
‘ | L SPECIFICATIONS Type Deskill Copy system Dry, electrostatic transfer system Originals Sheets, bound documents Original size Max, B4 (10 x14") Copy sizes Max. B4 (107 x14"), min. A6 x 81/2"} Copying sped (at 100% copy ratio) 13 minifloppies. A4 x 117} 11 copies/min. B4 (10 x 147} Continuous copy Max 99 copies, subtraction counter, auto repeat First copy time 7.5 sec. Warm-up Approx. 45 sec.
SPECIFICATIONS MULTI BYPASS SACKER SF-MFR (Option) Acceptable copy paper Weight: 56 to 80g/m? (15 to 21 lbs) Size: x 84/27) 10 BA (107 sheets provided the tote aggregate thickness does not excess Prom Copying speed at 100% ratio when the multi bypass sacker is sad. Power supply 12 inescapable. A% {81/2” x 117} 10 minifloppies. B4 (10 x 147) Drawn from the copier Dimensions 394(W) x 378(D) x 1517200 % 14T1MED)” x 41516 (H) Weight Approx 1.
