User manual

21
Before Using the Handset
SH-01H_E_02.fm
[21/28]
■ Slide operation
1
In the character entry screen, [T]/[Other
settings]/[Slide operation]
2
Select an item
 Upward slide: Set the operations available when you slide
the keyboard from its bottom to top.
 Downward slide: Set the operations available when you slide
the keyboard from its top to bottom.
 Rightward slide: Set the operations available when you slide
the keyboard from its left edge to right edge.
 Leftward slide: Set the operations available when you slide
the keyboard from its right edge to left edge.
■ Reset
1
In the character entry screen, [T]/[Other
settings]/[Reset]
2
Select an item
 Set the default settings: Reset the settings of S-Shoin.
 Clear learning dictionary: Reset the learning dictionary.
 Reset facemark list: Reset the contents of the emoticon list.
Example: When entering “文字”
1
In the character entry screen, enter “もじ”
1 Enlarge/Reduce
Enlarge/Reduce the conversion candidates field.
2 Conversion candidates field
Displayed when [Word prediction] is enabled.
Touch one of conversion candidates to enter.
If you set an Internet conversion engine, [Net conv] is
displayed. Touch it to display conversion candidates
searched by the conversion engine on the Internet.
2
[Convert]
3
In the conversion candidates field, select “文字”
1 Range reduction/Range enlargement
Reduce/Enlarge the range of characters to convert.
Displayed only when available.
2 Close
Close the conversion candidates field.
3 Conversion candidates field
Touch one of conversion candidates to enter.
If you set an Internet conversion engine, [Net conv] is
displayed. Touch it to display conversion candidates
searched by the conversion engine on the Internet.
4 Determine
Determine the conversion.
5 Predictive candidates
Predictive candidates are displayed.
6 Conversion candidates
Conversion candidates are displayed.
7 Katakana and alphanumeric
Katakana and alphanumeric conversion candidates are
displayed.
■ Wildcard prediction
Conversion candidates are predicted according to the number of
the entered characters and appear.
Enable [Wildcard prediction] in advance (nP. 20 “Conversion”).
This function is available in the Hiragana/Kanji input mode and
the Half Alphabet input mode.
Example: When entering “アナウンス”
1
In the character entry screen, enter “あな”
2
[S]/[S]/[S]
: Each time you touch [S], [*] is entered and the predictive
candidates appear according to the number of characters.
3
In the conversion candidates field, select “アナ
ウンス”
■ Inputting with kuten codes
You can use four-digit kuten codes assigned to each character for
entering kanji, hiragana, katakana, symbol, alphanumeric
characters, etc.
1
In the character entry screen, slide the input
mode switching key up/[Character Code]
2
Input a kuten code
: After the fourth digit is entered, the corresponding character
appears.
: After the fourth digit is entered, the input mode is switched to
the previous one.
■ Inputting with voices
You can enter characters with voices.
1
In the character entry screen, [T]/[Input UI]/
[Voice Input]
: Alternatively, slide [T] to the right while the QWERTY
keyboard is used or slide [T] down while the 12 keyboard is
used to switch to the voice input.
2
Speak at the microphone
Entering characters
In the following cases, the voice input may not work properly.
 When the voice is too loud
 When the surrounding noise is big
 When the phonation is not clear
 When the phonation is not natural
 When the pronunciation is too fast
 When any key is pressed or the microphone is touched
SH-01H_E.book 21 ページ ２０１５年１０月３０日 金曜日 午後４時２２分