User manual

26
Before Using the Handset
SH-01H_E_02.fm
[26/28]
■ Main status icon list
1
Drag the status bar down with your two fingers
at the same time
: Alternatively, touch and hold [}] to display the status panel.
2
Use the status panel
1 Function button
Make settings for use of the manner mode, Wi-Fi
function, location information, etc. Touch [Customize] to
rearrange, add and delete the function buttons.
･ If you touch [Location], the confirmation screens for the
use of location information are displayed. The mode to
be set may differ depending on whether you select
[DISAGREE] or [AGREE] (nP. 71 “Location”). [N] is
displayed when Mode is set to [High]/[Device only]
while [M] is displayed when Mode is set to [Battery
saving].
Home network
/: Suspending
.: Running
-: Preparing
;: VPN connected
A: Software update available
NOTTV signal strength
p: Level 4
q: Level 3
r: Level 2
s: Level 1
t: Outside the service area
I: Smart Lock
U: [glove mode] enabled
>: Notification icon (not appearing)
.: Alarm set
Battery level
8 to 7: Approx. 100 to 6%
>: Approx. 5% or less
While charging, the battery icon appears with [w]
superimposed.
Percentage of the remaining battery level appears on the left
side of the battery icon. Display/Hide the percentage with
[Display left percents of Battery] (nP. 66 “Display”).
Signal strength
!: Level 4
#: Level 3
$: Level 2
%: Level 1
&: Level 0
(: Outside the service area
): Airplane mode
3G data communication status
0: 3G available
1: Receiving data via 3G
2: Sending data via 3G
3: Sending and receiving data via 3G
GSM data communication status
P: GSM available
Q: Receiving data via GSM
R: Sending data via GSM
S: Sending and receiving data via GSM
LTE data communication status
k: LTE available
m: Rec
eiving data via LTE
n: Sending data via
LTE
o: Sending and receiving data via LTE
HSPA data communication status
p: HSPA available
q: Receiving data via HSPA
r: Sending data via HSPA
s: Sending and receiving data via HSPA
U: International roaming
NFC/Osaifu-Keitai lock status
d: Handset or docomo nano UIM card locked
e: Handset and docomo nano UIM card locked
Omakase Lock status
f: Handset or docomo nano UIM card locked by remote control
g: Handset and docomo nano UIM card locked by remote control
S: [Reader/Writer, P2P] enabled
Character input mode
!: Hiragana/Kanji
%: Half Alphabet
(: Half Numeric
$: Full Alphabet
&: Full Numeric
): Character Code
,: [Allow only priority interruptions] set
Manner mode status
+: Standard manner
*: Standard manner ([Allow only priority interruptions] set)
-: Silent manner
A: Talking with a speaker
B: Mute set
Wi-Fi signal strength
(: Level 4
): Level 3
*: Level 2
+: Level 1
,: Level 0
The Wi-Fi signal strength icon appears with [6] superimposed
like [5] while you connect to an access point which is not
connected to the Internet.
Simultaneous use of mobile and Wi-Fi networks
g: [Smooth change mode] enabled
h: [Dual Speed mode] enabled
Bluetooth
#: Connection stand-by
$: Connected
6: Measuring location information frequently
Answering memo
P: No answering memo when the answering memo is set
Q: One to nine answering memos when the answering memo is
set
R: 10 answering memos when the answering memo is set
Using the status panel
SH-01H_E.book 26 ページ ２０１５年１０月３０日 金曜日 午後４時２２分