User manual

60
Apps
SH-01H_E_06.fm
[60/64]
■ Street View
1
In the Maps screen, touch and hold any place/
touch the address, name of place or facility, etc.
2
[Street View]
: To change a displayed direction: Slide the screen up/down or
to the left/right
: To move a displayed place: Touch an arrow
: To switch to the compass mode: [4]
■ Searching for routes
You can search for a route from a start point to an end point.
1
In the Maps screen, [@]
2
Select how to get to the end point/touch the
search box above
: The present location is entered while it is being measured.
3
Enter a start point
4
Touch the search box below
5
Enter an end point
: Follow the instructions on the screen and operate after this
step.
■ Searching for facilities nearby
You can search for facilities near a location on the map being
displayed by genre.
1
In the Maps screen, touch the search box
2
Select a genre of facilities to search
: Alternatively, you can search by entering a name of place to
search in the search box.
3
Use the search result
: To display detailed information: Select an address, a name of
place or facility, etc.
: If there are two or more search results, touch a marker or
slide an address, a name of place or facility, etc. to the left/
right to display the other search results. Also, touch [LIST
RESULTS] to display the search results as a list.
YouTube is a free online video streaming service. You can
play, search and upload videos.
1
In the home screen, select “Google” folder/
[YouTube]
2
Select a video
: To display the search box: [O]
You can use alarm, world clock, timer and stopwatch.
Activate an alarm tone or vibrator at the specified time.
1
In the home screen, [R]/[Clock]/[a]
2
Touch a time of register destination
: To add a register destination: [p]
3
Select a time/[OK]
4
Set each item
1 Repeat
Set the repetition of the alarm.
2 Alarm sound
Set the alarm sound.
3 Label
Enter the label.
4 Delete
Delete the alarm.
5 Alarm ON/OFF
Enable/Disable the alarm.
6 Vibration
Set whether to use the vibrator.
7 Switch displays
■ Stopping an alarm
Activate an alarm tone or vibrator at the set alarm time.
1
Slide [e] to [f] while an alarm is ringing
: To use a snooze: slide [e] to [g]
Stopping an alarm while display is turned on
When the set alarm time arrives while a screen other than lock
screen of the touch panel is displayed, the alarm notification is
displayed. Stop the alarm by using the notification.
1
[DISMISS] while an alarm is ringing
: To use a snooze: [SNOOZE]
■ Adjusting an alarm volume
1
In the alarm screen, [z]/[Settings]
2
[Alarm volume]/adjust the volume/[OK]
Some areas are not supported by Street View.
When the compass mode is used, the geomagnetic compass of
the handset and the direction displayed by Street View are
associated with each other.
YouTube
Clock
Alarm
An alarm is not activated when the handset is turned off at the
set alarm time.
When the set alarm time arrives during a call, the other party's
voice and notification sound are heard at the same time.
SH-01H_E.book 60 ページ ２０１５年１０月３０日 金曜日 午後４時２２分