User manual

Contents/Precautions
8
General notes
SH-02H is waterproof/dustproof, however, do not allow
foreign object such as liquids or dust to get inside the
handset and do not allow foreign object such as liquids or
dust to adhere to accessories or optional parts.
The adapter and docomo nano UIM card are not waterproof/dustproof.
Do not use in humid or steamy areas such as bathrooms and avoid
exposing to rain and other forms of moisture. If they are carried close
to the skin, perspiration may cause internal components to corrode and
result in malfunction. Note that if a problem is found to be due to
moisture, the handset and parts are not covered by warranty and in
some cases may be irreparable. Even when repairs are possible, repair
charges will be incurred, since the damage is not covered by warranty.
Clean only with a soft and dry cloth (such as the type used
for eyeglasses).
･ Forceful rubbing of the display with a dry cloth etc. may scratch its
surface.
･ Water drops, dirt, etc. left on the display may cause stains to form on
its surface.
･ Never use chemicals such as alcohol, thinners, benzene or
detergents, as these agents may erase the printing or cause
discoloration.
Occasionally clean terminals with a dry cotton swab etc.
Dirty terminals may result in poor connections and loss of power or
insufficient battery charge. Keep the terminals clean with a dry cotton
swab etc.
Be careful with the terminals while cleaning them.
Do not place the equipment near an air conditioning vent.
Condensation formed due to rapid changes in temperature may cause
internal corrosion and lead to a malfunction.
Do not apply excessive force on the handset etc. when using
it.
Carrying the equipment in a tightly packed bag or sitting on it put in your
pocket may cause damage to the display, internal components, etc. or
result in a malfunction.
Keeping an external connector device plugged into the external
connector terminal or earphone/microphone terminal may cause
damage or a malfunction.
Do not rub or scratch the display with metal etc.
May scratch it and cause a malfunction or damage.
Read the respective user’s guides supplied with supported
optional parts carefully.
Notes about the handset
Do not forcefully press the surface of the touch panel or
operate with a pointed object such as a fingernail, ballpoint
pen or pin.
May damage the touch panel.
Avoid using the handset in extremely high or low
temperatures.
Use the handset within the range of a temperature between 5 ℃ and
35 ℃ and a humidity between 45% and 85%.
Using the handset close to land-line phones, TVs, radios, etc.
may have harmful effects on the operation of such
equipment. Move as far away as possible from such items
before use.
Keep a separate memo noting information stored on the
handset.
DOCOMO shall not be liable for any loss of content.
Do not drop or otherwise subject the handset to severe
impact.
May cause a malfunction or damage.
Sides
PC + ABS resin/UV coating for
surface
Back
PMMA + PC resin/Hard coating
for surface
Surrounding area of back PA resin/UV coating for surface
docomo nano UIM card slot SUS/Ni plating
microSD Card slot SUS/Ni plating
docomo nano UIM card/microSD
Card slot cover
PC resin/UV coating for surface
Gasket of docomo nano UIM
card/microSD Card slot cover
EPDM
Sticker indicating position for
inserting microSD Card
PET resin/Printing on the back
surface
Tray for inserting docomo nano
UIM card
POM resin
IMEI plate PET resin
Power key Aluminum/Anodizing
Side key Aluminum/Anodizing
Camera panel
PMMA + PC resin/Hard coating
for surface
Decoration of camera Aluminum/Anodizing
External connector terminal
SUS/Sn plating, Copper alloy/
Gold plating
Strap pin SUS/Ni plating
Part Material/Surface treatment
Handling precautions