User manual

Apps
59
When using a GPS function overseas, the displayed map based
on the acquired location information (latitude and longitude
information) may not be accurate because of the legal system etc.
in each country and the area.
Packet communication charges may be incurred, since assisted
GPS data such as satellite information is automatically retrieved
when you measure present location.
Packet communication charges are incurred when you display a
map based on location information etc.
Maps
You can measure your present location, use the navigation
function to check how to get to your destination in detail, etc.
It is necessary to set [Location] to On to measure the present
location (nP.70 "Location").
1
In the home screen, select "Google" folder/
[Maps]
2
Use Maps
: To rotate the map: Keep a finger on the touch panel and turn
the map to the desired direction with another finger
: To display sterically: Slide up with your two fingers at the
same time
: To measure present location: [0]
■ Street View
1
In the Maps screen, touch and hold any place/
touch the address, name of place or facility, etc.
2
[Street View]
: To change a displayed direction: Slide the screen up/down or
to the left/right
: To move a displayed place: Touch an arrow
: To switch to the compass mode: [4]
■ Searching for routes
You can search for a route from a start point to an end point.
1
In the Maps screen, [@]
2
Select how to get to the end point/touch the
search box above
: The present location is entered while it is being measured.
3
Enter a start point
4
Touch the search box below
5
Enter an end point
: Follow the instructions on the screen and operate after this
step.
■ Searching for facilities nearby
You can search for facilities near a location on the map being
displayed by genre.
1
In the Maps screen, touch the search box
2
Select a genre of facilities to search
: Alternatively, you can search by entering a name of place to
search in the search box.
3
Use the search result
: To display detailed information: Select an address, a name of
place or facility, etc.
YouTube is a free online video streaming service. You can play,
search and upload videos.
1
In the home screen, select "Google" folder/
[YouTube]
2
Select a video
: To display the search box: [O]
You can use alarm, world clock, timer and stopwatch.
Alarm
Activate an alarm tone or vibrator at the specified time.
1
In the home screen, [R]/[Clock]/[a]
2
Touch a time of register destination
: To add a register destination: [p]
3
Select a time/[OK]
4
Set each item
1 Repeat
Set the repetition of the alarm.
2 Alarm sound
Set the alarm sound.
3 Label
Enter the label.
4 Delete
Delete the alarm.
5 Alarm ON/OFF
Enable/Disable the alarm.
6 Vibration
Set whether to use the vibrator.
7 Switch displays
Some areas are not supported by Street View.
When the compass mode is used, the geomagnetic compass of
the handset and the direction displayed by Street View are
associated with each other.
YouTube
Clock
An alarm is not activated when the handset is turned off at the
time for the alarm to ring.
When the set alarm time arrives during a call, the other party's
voice and notification sound are heard at the same time.
5
6
7
2
1
3
4