User manual

Table Of Contents
International Roaming
85
3G: Use 3G network.
GSM: Use GSM/GPRS network.
Network operators
At the time of purchase, the handset is set to automatically
search for and switch to available networks. When you want to
manually switch networks, set by performing following
operations.
1
In the home screen, [R]/[Settings]/[More]/
[Cellular networks]/[Network operators]
: If the confirmation screen for data communication is
displayed, check the content and select [OK].
: Search for networks and a list of network operators is
displayed.
: When an error occurs during the network search, disable
[Data enabled] (nP.84 "Settings for use overseas") and try
again.
2
Select a network operator
: To search for network operators again: [Search networks]
: To automatically select a network operator: [Select
automatically]
Date & time
If [Automatic date & time] and [Auto timezone] of Date & time
are enabled, the handset receives information on time and time
differences from the network of a connected overseas network
operator, then time and time differences are corrected.
Time and time differences may not be adjusted correctly
depending on the network of an overseas network operator. In
this case, set time zone manually.
The correction timing may differ depending on the network
operator.
For details on Date & time nP.74 "Date & time"
Inquiries
When the handset or the docomo nano UIM card is lost or stolen
overseas, promptly contact DOCOMO and conduct a procedure
for canceling the use of service from your country of stay. Refer to
the last page for inquiries. Note that call/communication charges
after the handset or the docomo nano UIM card is lost or stolen
are incurred to the subscriber.
As for land-line phone etc., "International call access number" of
your country of stay or "Universal number international prefix" is
required.
Making a call outside your country of stay
(including Japan)
1
In the home screen, []]/[Dial]
2
"+" (touch and hold "0")/enter country code,
area code (city code) and the other party's
phone number/[0]
: When the area code (city code) begins with "0", omit the first
"0" when dialing (Include the "0" when making a call to some
countries or regions such as Italy).
: Alternatively, enter a phone number/[}]/[International
call]/select a country code to enter a country code.
The first "0" of the area code (city code) will be omitted.
Making a call using International Dial Assist
When you make a call to other countries from your country of
stay, you can make an international call with simple operation
using International Dial Assist.
Set International dial assist in advance.
The first "0" of a phone number will be automatically converted to
the country code you set in Country code.
1
In the home screen, []]/[Dial]
2
Enter a phone number/[0]
3
[Converted number]
Setting of International Dial Assist
1
In the home screen, [R]/[Settings]/[Call]/
[Roaming settings]/[International dial assist]
2
Select an item
Automatic conversion: Set whether to make calls using
International Dial Assist.
Country code: Set a country code to use when using
International Dial Assist.
International prefix: Set an international prefix to use when
using International Dial Assist.
Making a call in your country of stay
You can make a domestic call in your country of stay in the
same way as you do in Japan.
Always enter the area code (city code), even when the number is
in the same area.
Making/Receiving a call in your
country of stay
Even if you notify the caller ID, [Unknown], [Anonymous], etc.
may appear depending on the network operator, and the caller
ID may not be displayed correctly.