User manual

8
Contents/Precautions
SH-04H_E_01.fm
[8/13]
Handset
TV antenna cable SH01
SH-04H is waterproof/dustproof, however, do not allow
liquid such as water (drinking water, sweat, seawater, pet
urine, etc.) and foreign object such as dust to get inside the
handset and do not allow them to adhere to accessories or
optional parts.
The adapter, docomo nano UIM card and TV antenna cable are not
waterproof/dustproof. Do not use in humid or steamy areas such as
bathrooms and avoid exposing to rain and other forms of moisture. If
they are carried close to the skin, perspiration may cause internal
components to corrode and result in malfunction. Note that if a
problem is found to be due to moisture, the handset and parts are not
covered by warranty and in some cases may be irreparable. Even
when repairs are possible, repair charges will be incurred, since the
damage is not covered by warranty.
Clean only with a soft and dry cloth (such as the type used
for eyeglasses).
･ Forceful rubbing of the display with a dry cloth etc. may scratch its
surface.
･ Water drops, dirt, etc. left on the display may cause stains to form
on its surface.
･ Never use chemicals such as alcohol, thinners, benzene or
detergents, as these agents may erase the printing or cause
discoloration.
Occasionally clean terminals with a dry cotton swab etc.
Dirty terminals may result in poor connections and loss of power or
insufficient battery charge. Keep the terminals clean with a dry cotton
swab etc.
Be careful with the terminals while cleaning them.
Do not place the equipment near an air conditioning vent.
Condensation formed due to rapid changes in temperature may
cause internal corrosion and lead to a malfunction.
Do not apply excessive force on the handset when using it.
Carrying the equipment in a tightly packed bag or sitting on it put in
your pocket may cause damage to the display, internal components,
internal battery, etc. or result in a malfunction.
Keeping an external connector device plugged into the external
connection jack may cause damage or a malfunction.
Do not rub or scratch the display with metal etc.
May scratch it and cause a malfunction or damage.
Read the respective user's guides supplied with supported
optional parts carefully.
Do not forcefully press the surface of the touch panel or
operate with a pointed object such as a fingernail, ballpoint
pen or pin.
May damage the touch panel.
Avoid using the handset in extremely high or low
temperatures.
Use the handset within the range of a temperature between 5°C and
35°C and a humidity between 45% and 85%.
Using the handset close to land-line phones, TVs, radios,
etc. may have harmful effects on the operation of such
equipment. Move as far away as possible from such items
before use.
Follow the instructions given by the respective
medical facilities regarding the use of the handset
on their premises.
May have harmful effects on the operation of the electronic
medical equipment.
Material list
Part Material/Surface treatment
Display side
Reinforced glass/Antifouling
coating
Back
PC resin + Acrylic resin/Hard
coating
Exterior (Metal section) Aluminum/Anodizing
Exterior (Resin section)
PA resin (With glass)/
Unglazed
Grip sensor Acryl/Unglazed
Incoming/Charging lamp PC resin/Unglazed
Power key Aluminum/Anodizing
Volume up/down key Aluminum/Anodizing
Fingerprint sensor Epoxy resin/Hard coating
Camera panel Reinforced glass/AR coating
Decoration of camera Aluminum/Anodizing
Earpiece (Receiver) mesh
(Handset color White)
Polyester resin/Aluminum
coating, Water repellent
coating
Earpiece (Receiver) mesh
(Handset color Black, Green)
Polyester resin/Water
repellent coating
Speaker mesh
Polyester resin/Water
repellent coating
Surrounding area of earphone/
microphone terminal
PA resin (With glass)/
Unglazed
External connection jack (Metal
section)
Copper + SUS/Gold plating, Ni
plating
External connection jack (Resin
section)
PA resin
Surrounding area of external
connection jack
PA resin (With glass)/
Unglazed
Docomo nano UIM Card and
microSD Card cover
PC resin/Hot stamping, Hard
coating
Tab, Hinge section of docomo
nano UIM Card and microSD
Card cover
Elastomer resin
Gasket of docomo nano UIM
Card and microSD Card cover
Silicon rubber
docomo nano UIM card slot SUS
microSD Card slot SUS/Ni plating
Tray for inserting docomo nano
UIM card
POM resin
IMEI plate PET resin
Part Material/Surface treatment
Earphone/Microphone terminal
(Resin section)
Elastomer resin
Earphone/Microphone terminal
(Metal section)
Ni base, Brass/Gold plating
Cord Elastomer resin
Plug (Resin section)
Elastomer resin, PP resin,
POM resin
Plug (Metal section) Ni base, Brass/Gold plating
Handling precautions
General notes
Notes about the handset
Part Material/Surface treatment
SH-04H_E.book 8 ページ ２０１６年６月１４日 火曜日 午後１時３５分