User manual

14
Before Using the Handset
SH-04H_E_02.fm
[14/30]
1 Docomo nano UIM Card and microSD Card cover
2 docomo nano UIM card slot
The tray for inserting the docomo nano UIM card is stowed.
3 microSD Card slot
4 Grip sensor
5 Incoming/Charging lamp
6 Front camera
7 Proximity sensor (upper part of the display)/Brightness
sensor
*1
The proximity sensor (upper part of the display) detects the
distance to the face and prevents inadvertent operation of
touch panel during a call.
The brightness sensor detects the brightness of the
surrounding area and adjusts the brightness of the backlight.
8 Earpiece
9 Display/Touch panel
*2
a Proximity sensor for Grip Magic (lower part of the display/
back)
*1
Detects the distance to the object and prevents inadvertent
operation of Grip Magic.
b x/y: Volume up/down key
Adjusts the volume in each function.
c H: Power key
Use to turn the power on/off, etc.
Use to turn the display on/off.
d Fingerprint sensor
Use to unlock the touch panel etc. by fingerprint
authentication.
e Back camera
f Mobile light
g Microphone
Use when recording videos.
Use to measure ambient noises for communicating by making
your voices sound clear when using Clear talk.
Use as a mouthpiece during a hands-free call.
h Earphone/Microphone terminal
i a mark
IC card is contained (It cannot be removed).
j Strap hole/Air vent
There is a vent to remove excess air from the handset in the
rear of the strap hole.
k Mouthpiece/Microphone
Use as a microphone when recording videos or talking to
EMOPA.
l External connection jack
m Speaker
Ringtone, music, etc. can be heard from here.
The other party's voice can be heard from here during a
hands-free call.
n LTE/FOMA antenna
*3
o Wi-Fi/Bluetooth antenna
*3
p GPS/TV/Wi-Fi antenna
*3
*1 Do not cover the sensor area with your hand or paste a sticker
etc. on the sensor area. The sensor may not work properly.
*2 If the handset is equipped with a commercially available
corresponding flip cover, you can turn the display on/off by
opening/closing the flip cover. If you close the equipped flip
cover obliquely, the display may not be turned off.
*3 The antenna of back is built into the main body. At sides of the
handset, the metal sections of surface are used as the antenna.
Covering the antenna area with your hand may influence the
quality.
Before Using the Handset
Part names and functions
Mobile light
The mobile light may be automatically turned off if you use the
handset for a long time or the handset becomes warm after the
mobile light is turned on. Also, you may not be able to use the
mobile light if the handset is warm.
Microphone
When using functions which support the microphone, do not
cover the hole of the microphone.
Earphone/Microphone
Depending on the type of the earphone/microphone, it may not
be available.
SH-04H_E.book 14 ページ ２０１６年６月１４日 火曜日 午後１時３５分