User manual

74
Handset Settings
SH-04H_E_07.fm
[74/78]
You can set contacts in the phonebook not to be displayed in
the phonebook, outgoing/incoming call history, etc. by setting
the secrecy setting for the contacts.
When you temporarily disable the secret mode, both normal
contacts and contacts for which the secrecy setting is set are
displayed.
If the display is turned off while the secret mode is temporarily
disabled, the secret mode is enabled.
1
In the home screen, [R]/[Settings]/[Lock &
Security]/[Secrecy settings]
2
Enter the passcode/[OK]
: The secret mode is temporarily disabled.
3
Select an item
 Set contact secrecy: Set the secrecy setting for contacts in
the phonebook.
 Disable secret mode temporarily: Make settings for
temporary cancellation of the secret mode.
 Guide: Display how to temporarily disable the secret mode
and explanation for contacts in the phonebook for which the
secrecy setting is set.
Disabling the secret mode temporarily
1
Drag the status bar down with your two fingers
at the same time
2
Touch and hold [C]
3
Enter the passcode/[OK]
Some functions for convenient use of the handset require
security codes. In addition to security code used for various
handset operations, use security codes such as the network
security code when using network services. Use security
codes properly according to the purposes to fully utilize the
handset.
Entered security code for various functions and PIN code turn
into [・].
Precautions about various security codes
Do not use easily predictable numbers for security codes to be
set such as “birthday”, “part of a phone number”, “address or
room number”, “1111” or “1234”. Keep a separate memo of
security codes.
Keep security codes private. If the security codes are found and
improperly used by others, DOCOMO shall not be liable for any
damages incurred on the users.
If you forget your security codes, you are required to bring your
identification (a driver's license etc.), your handset and your
docomo nano UIM card to a docomo Shop.
For details, contact the number listed in “General Inquiries” on
the last page.
PUK (PIN Unlock Key) is described in the agreement form
(customer copy) you received at the time of subscription at a
docomo Shop. If you made a subscription at a shop other than a
docomo Shop, bring your identification (a driver's license etc.)
and your docomo nano UIM card to a docomo Shop or contact
the number listed in “General Inquiries” on the last page.
■ Security key (security code for various functions)
If you set any restrictions, you need to enter the security key to
temporarily disable them. [0000] is set as a security key by default
but you can change it (nP. 73 “Lock & security”).
If you enter wrong security keys five times continuously, you
cannot enter it for 30 seconds.
If you register your fingerprint, you can unlock it by fingerprint
authentication as well.
･ If you fail in fingerprint authentication five times continuously,
you cannot unlock it by the fingerprint. In this case, enter the
security keys.
■ Network security code
Network security code is a four-digit code required for confirming
the subscriber's identity when an order is received at a docomo
Shop, docomo Information Center or “お客様サポート” (Support),
used for accessing various network services, etc. You can set any
code at the time of subscription but you can change the code.
For details on network security code, refer to the DOCOMO
website.
■ PIN code
A docomo nano UIM card has a security code called PIN code. This
security code is set to [0000] by default but you can change the
code (nP. 75 “Setting up SIM card lock”).
The PIN code is a four- to eight-digit security code that needs to be
entered for recognizing the user of the handset every time a
docomo nano UIM card is inserted or when a device is turned on to
prevent unauthorized use of the docomo nano UIM card by a third
party. Making/Receiving a call and the device operation are
enabled by entering PIN code.
Use the previously set PIN code when inserting a docomo nano
UIM card that has been used in another device. It is [0000] if the
setting has not been changed.
If you enter wrong PIN codes three times continuously, it is
locked and the docomo nano UIM card becomes unavailable. In
this case, unlock with “PUK” (PIN Unlock Key).
■ PUK (PIN Unlock Key)
PUK (PIN Unlock Key) is an eight-digit number used to disable the
PIN code lock. You cannot change the code.
If you enter wrong codes 10 times continuously, the docomo
nano UIM card is completely locked. In this case, contact a
docomo Shop.
Fingerprint authentication is an authentication function to
operate by touching the fingerprint sensor with a finger. You
can unlock the touch panel etc.
■ Cautions when using fingerprint authentication
function
Fingerprint authentication is carried out using characteristics
information of a fingerprint image. If your fingerprint image has
only a few characteristics information, you may not be able to
use fingerprint authentication.
[Use secure credentials]
If you delete a certificate, you cannot refer to the certificate from
[Use secure credentials] but it can be referred to from other
functions. If you want to delete the certificate completely, carry
out Clear credentials.
[Clear credentials]
Settings for VPN are also deleted.
Secrecy settings
Security codes used on the handset
Fingerprint authentication
SH-04H_E.book 74 ページ ２０１６年６月１４日 火曜日 午後１時３５分