LL-S201A LCD MONITOR OPERATION MANUAL
IMPORTANT: To aid reporting in case of loss or theft, please record the product’s model and serial numbers in the space provided. The numbers are located in the rear of the product. Model No.: Serial No.: U.S.A. ONLY This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
IMPORTANT INFORMATION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
DEAR SHARP CUSTOMER Thank you for your purchase of a SHARP LCD product. To ensure safety and many years of trouble-free operation of your product, please read the Safety Precautions carefully before using this product. SAFETY PRECAUTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety.
SAFETY PRECAUTIONS (Continued) 19. Usage of the monitor must not be accompanied by fatal risks or dangers that, could lead directly to death, personal injury, severe physical damage or other loss, including nuclear reaction control in nuclear facility, medical life support system, and missile launch control in a weapon system. 20. Do not touch the parts of the product or the AC adapter that become hot for long periods of time. Doing so may result in low-temperature burns.
TIPS AND SAFETY INSTRUCTIONS - The TFT color LCD panel used in this monitor is made with the application of high precision technology. However, there may be minute points on the screen where pixels never light or are permanently lit. Also, if the screen is viewed from an acute angle there may be uneven colors or brightness. Please note that these are not malfunctions but common phenomena of LCDs and will not affect the performance of the monitor.
Contents IMPORTANT INFORMATION.............................................3 DEAR SHARP CUSTOMER...............................................4 SAFETY PRECAUTIONS...................................................4 TIPS AND SAFETY INSTRUCTIONS................................6 Supplied Components......................................................7 System Requirements......................................................7 Part Names........................................................................
Part Names nFront view 1. Power LED (See page 13.) 1 nRear view 4 3 1 2 4 7 8 9 10 11 5 12 6 1. Flap (See page 12.) 2. VESA holes (See page 24.) 3. Anti-theft hole ( ) Allows the monitor to be secured using a commercially available anti-theft lock. The anti-theft hole is compatible with Kensington’s MicroSaver security system. 4. Speakers 5. Power/Menu button (See page 13, page 17.) 6. Cable clamp (See page 9.) 7. Headphone jack (See page 10.) 8. HDMI input terminal (See page 9.) 9.
Binding Cables Secure the HDMI cable, DisplayPort cable, and USB cable using the cable clamp. 1. Remove the cable clamp. 2. Route the cables through the cable restraint slot. 3. Push the cable clamp down into place. Cable restraint slot Cable clamp Cable clamp Caution • When connecting cables, spread a soft cloth on a stable level surface such as a desk, and gently place the monitor on it with the screen facing down.
Connecting Peripheral Equipment nUsing the touch panel To use the touch panel, connect the monitor to a USB port on a PC using the supplied USB cable. Connecting headphones (commercially available) Headphones (commercially available) with a stereo mini plug (φ 3.5 mm) can be connected to the monitor. φ 3.
Installation The monitor can be installed in three different ways. nMounting the monitor on the stand 1. Place the stand on a level surface. Standing position Place the monitor on the supplied stand. Caution • The stand is for use in landscape orientation. It cannot be used for portrait orientation. nAssembling the stand 1. Insert the back into the front. Align the mark () on the front with the edge of the back and insert the back from above. Back Back 2. Set the monitor on the stand.
Installation Horizontal position nDisassembling the stand 1. Remove the bottom cover. Push the tabs in towards the center and pull. Place the monitor on a table or other level surface. Caution Tabs • When using the monitor horizontally, use the horizontal tab in the upright position. 1. Lift up the two tabs on the back of the monitor. Bottom cover 2. Remove the back from the front. Depress the button on the front and slide the back across, then pull the back up. Back Button Front 2.
Turning Power On/Off Turning on the power Turning off the power 1. Press the POWER button. 1. Turn off the PC. 2. Depress the POWER button for around 2 seconds. POWER button POWER button Press Power LED The power LED turns on. The power LED turns off. Caution • If the monitor will not be used for a long time, disconnect the power plug from the power outlet. 2. Turn on the PC. The screen appears.
Touch Action Touch action modes nCommon finger and touch pen actions There are three touch action modes: finger/pen mode, penonly mode, and finger-only mode. These modes can be changed on the menu screen. The monitor is set to finger/pen mode when shipped. Single-tap Touch the screen with your finger/touch pen. Finger/pen mode In this mode, the screen can be touched with your finger or with the touch pen.
Touch Action Drag-and-drop Touch the screen with your finger/pen and move without lifting. When you have finished the movement, lift your finger/touch pen. nFinger actions Zoom While touching the screen with two fingers, move them closer together and farther apart. Slide to pan With your finger/touch pen touching the screen, move it up and down to scroll the screen. Pinch Stretch Flicks Move your finger/touch pen in a flicking motion.
Touch Action Other functions In Windows 8, input panel functions can be used. In Windows 7, touch pointer and input panel functions can be used. For information about the touch pointer and input panel functions, see Windows Help. Touch pointer : A translucent image of a mouse appears near the point touched. The left/right buttons of the image can be clicked to perform the same actions as left/right clicking a mouse.
Monitor Settings Menu operations The monitor settings are configured by displaying the menu screen. The operations on this page are the basic operations. 4. Touch [Exit] or press the MENU button. The menu screen disappears. Caution • Do not turn off the power while the menu screen is displayed. Doing so may initialize the settings. • While the menu screen is displayed, touch actions are not possible other than those for the menu screen.
Monitor Settings Menu functions Setup Input Select Volume Rotation Finger-only Pen-only mode mode Finger/pen mode Touch mode selection Touch mode selection These icons switch the touch action mode. A ( ) mark is displayed at the top of the icon for the selected mode. The mode can be checked with the touch mark located at the upper-right portion of the screen. (See pages 19, 21) Input Select This icon manually switches the signal input source from the PC.
Monitor Settings SETUP Menu Details Position Position When the monitor is used in portrait orientation (power/menu button on the top), this icon moves the display position of the menu screen to the bottom of the screen. Mode Mode Normal This mode is suited to normal PC screen display. Pen Writing This mode is suited to pen writing position. Game This mode is suited to video games. Multimedia This mode is suited to video playback. User The user can adjust the image quality.
Monitor Settings Prohibiting operations (operation lock) This function makes it possible to prohibit operations to turn the power off and to prohibit touch action on the screen. If an operation is attempted when the monitor is locked, a key mark is displayed for around 5 seconds. (See page 21) Operation lock is enabled. A key mark is displayed on the screen and it disappears after around 5 seconds. TIPS • If the menu screen is displayed when locked, the invalid action mark is displayed.
Monitor Settings Monitor status indicators Disabling operation lock 1. Press the MENU button. The menu screen is displayed. Monitor status is displayed at the top right of the screen. Touch Mark MENU button Rotation Mark Key Mark Press 2. While touching [Volume], touch [Finger-only mode] for at least 1 second. Touch Mark The touch mark displays the current touch action mode. Finger/pen mode This mark is displayed during finger/pen mode. Pen-only mode This mark is displayed during pen-only mode.
Troubleshooting If you are experiencing any problem with your display, before calling for service, please review the following troubleshooting tips. There is no picture or sound. • Are the AC adapter and power cord connected correctly? (See page 10.) • Is the power on? (See page 13.) There is a picture but no sound. • Make sure the volume is not set to minimum. (See page 18.) • Is the sound muted? (See page 18.) • When headphones are connected, no sound will come from the speakers. (See page 10.
Specifications nProduct Specifications Model LCD component Max. resolution Max. colors Pixel pitch Viewing angle Screen active area Plug and play Color adjustment Image quality menu Color temperature LL-S201A 20" Class [19-1/2 inch (49.5cm) diagonal] TFT LCD (pixels) 1920 x 1080 Approx. 16.77 million colors 0.225 mm (H) × 0.
Specifications nDimensional Drawings Note that the values shown are approximate values. 18-1/4 [463.8] VESA holes * 1-15/16 1-15/16 [50] [50] 1 [25.2] (excluding protrusions) Unit: inch [mm] 18-1/4 [463.8] 1-15/16 1-15/16 [50] [50] 10-13/16 [274.8] Opening height (9-9/16 [243]) 10-13/16 [274.8] Opening width (17 [432]) * Use a VESA-compliant mounting bracket capable of supporting 4 times the weight of the monitor.
Specifications nSupported frequency Resolution Frame rate Remarks 640×480 60Hz VGA 800×600 60Hz SVGA 1024×768 60Hz XGA 720×480p 59.94/60Hz 1280×720p 50/59.94/60Hz 1920×1080p 50/59.94/60Hz 720×576p 50Hz * All are compliant only with non-interlaced. * Each is scaled to 16:9 and displayed using the full screen. * Depending on the connected PC, images may not be displayed properly even if the compatible signal described above is input.
LL-S201A Mu EN13A(1)
