User Manual

12
• Before operating your new microwave oven make
sure you read and understand this operation
manual completely.
• Before the oven can be used, follow these proce-
dures:
1. Plug in the oven. Close the door. The oven display
will show
WELCOME PRESS CLEAR AND
PRESS CLOCK
.
2. Touch the Stop/Clear pad.
:
will appear.
3. Touch Clock and follow directions to set.
TO SET THE CLOCK
• Suppose you want to enter the correct time of day
12:30 (A.M. or P.M.).
PROCEDURE DISPLAY
1
2
This is a 12 hour clock. If you attempt to enter an incor-
rect clock time,
ERROR
will appear in the display. Touch
the Stop/Clear pad and re-enter the time.
• If the electrical power supply to your microwave
oven should be interrupted, the display will inter-
mittently show
WELCOME PRESS CLEAR AND
PRESS CLOCK
after the power is reinstated. If this
occurs during cooking, the program will be erased.
The time of day will also be erased. Simply touch
Stop/Clear pad and reset the clock for the correct
time of day.
NOTE: Your oven can be programmed with the
door open except for START/Touch on, Minute Plus,
Sensor Reheat, Keep Warm and Popcorn.
STOP/CLEAR
Touch the Stop/Clear pad to:
1. Erase if you make a mistake during programming.
2. Cancel kitchen timer.
3. Stop the oven temporarily during cooking.
4. Return the time of day to the display.
5. Cancel a program during cooking, touch twice.
Touch Clock pad.
ENTER
T.T
Enter the correct time
of day by touching the
numbers in sequence.
12:30000
T.T
Clock
3
12:30000
T.T
Touch Clock pad.
Clock
1 2 3 0
BEFORE OPERATING
TIME
T.T