REFRIGERATOR - FREEZER OPERATION MANUAL CONTENTS • • • • • • • • • WARNING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 CAUTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 STORING FOOD . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(B326).
Thank you very much for buying this SHARP product. Before using your SHARP refrigerator, please read this operation manual to ensure that you gain the maximum benefit from it. • This refrigerator is for household only, with ambient temperature between +5°C and +43°C. The refrigerator should not be subjected to temperatures of -10°C or below for a long period of time.
INSTALLATION When right and left doors are not properly aligned, adjust the adjustable feet. 3 using WARNING ■ Do not install the refrigerator in a damp or wet location as this may cause damage to the insulation and a leakage. Condensation may also build on the outer cabinet and cause rust. When the left door is raised. When the right door is raised. adequate ventilation space around the refrigerator. 1 Keep • The figure shows the minimum required space for installing the refrigerator.
DESCRIPTION 12 11 23 22 12 22 13 14 1 15 16 24 17 18 5 6 19 20 21 6 7 7 22 22 8 9 8 9 10 1. 2. 3. 4. 5. Door pockets (3 pcs.) Refrigerator shelves (2 pcs.) Shelf Bottle pocket (left) Highly sealed vegetable crisper The cover of the Vegetable crisper opens as the case is pulled. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. Freezer cases (small) (3 pcs.) Freezer cases (large) (2 pcs.) Casters (4 pcs.) Adjustable feet (2 pcs.
Control panel Sound OFF indication This indication shows sound “OFF”. Door alarm indication This indication shows door alarm “ON”. Select button Press to select feature icon and door alarm signal. / button Press to select feature ON/OFF or temperature setting. (Enter) button Finalise the setting. Feature icons Icons of features in operation are displayed.
OPERATION Plasmacluster The ionizer inside the refrigerator release clusters of positive and negative ions, into the refrigerator compartment. These ion clusters inactivate airborne mould fungus. Energy Saving Use this feature when you want to switch the appliance to energy-saving operation. mold fungus To start operation To start operation 1 Select “Plasmacluster icon”. 1 Select “Energy saving” icon. Flashing Flashing 2 Select “ON”. 2 Select “ON”. 3 Finalise the setting. 3 Finalise the setting.
Vacation mode Express Freezing Use this feature when going on a trip or leaving the house for long periods of time. Express freezing is so convenient for home-freezing. To start operation To start operation 1 Select “Vacation mode” icon. 1 Select “Express freezing” icon. Flashing Flashing 2 Select “ON”. 2 Select “ON”. 3 Finalise the setting. 3 Finalise the setting. To cancel operation To cancel operation It is the same process as activating this function. Select “OFF” in step 2.
Child Lock Door Alarm Button operation of the control panel will be locked. Use this feature to prevent the panel from being used unintentionally. • Factory has set the door alarm to “ON”. • If the refrigerator door is left open, the door alarm will sound. • The door alarm will sound after 1 minute of opening the door and again after a further minute has passed. (Once in each case) • If the door is left open for approx. 3 minutes, the alarm will sound continuously.
Controlling Temperature The refrigerator controls its temperature automatically. However, if needed, adjust the temperature as follows. Refrigerator compartment Freezer compartment Adjustable between 0°C and 6°C in steps of 1°C. Adjustable between -13°C and -21°C in steps of 1°C. 1 Select 1 Select icon. The display shows the current preset temperature. icon. The display shows the current preset temperature. Flashing Flashing 2 Set the temperature. 2 Set the temperature. 3 Finalise the setting.
STORING FOOD Vegetables Dairy products Fruits Small foods Eggs etc. Small foods Juice etc. Bottles etc. Bottles etc. (Big size) Frozen foods (Small size) Meat, Fish, Poultry etc. ● Vegetables are improper in this case. They may be frozen. Frozen foods (Big size) Refrigeration reduces the rate of food spoilage. To maximise the shelf life of perishable food products, ensure that the food is of the freshest possible quality. The following is a general guide to help promote longer food storage.
CARE AND CLEANING WARNING When the compartment light is blown ■ Unplug the refrigerator first to prevent electric shock. ■ Do not splash water directly on the outer cabinet or the interior. This may lead to rusting and deterioration of the electrical insulation. Contact the service agent approved by SHARP to request a replacement compartment light. The compartment light is not to be removed other than by qualified service personnel.
REPLACING THE PLUG The mains lead of this product is fitted with a non-rewireable plug incorporating a 13A fuse. Should the fuse need to be replaced, a BSI or ASTA approved 13A fuse should be used. IMPORTANT : Never use the plug without the fuse cover fitted. If the fitted plug is not suitable for your socket outlets, remove the fuse from the plug then cut-off the plug from the cable. IMPORTANT : Dispose of the cut-off plug immediately and safely.
BEFORE YOU CALL FOR SERVICE Before you call for service, check the following points. Problem Solution The outside of the cabinet is hot when touched. It is normal. The hot pipe is in the cabinet in order to prevent dew generation. When there is refrigerator noise. It is normal for the refrigerator to produce the following sounds. • Loud noise produced by the compressor when operation starts --- Sound becomes quieter after a while.
GUARANTEE Subject to the conditions listed below Sharp Electronics Europe Ltd. (here in after called "the Company") guarantee to provide for the repair of, or at its option replace this Sharp Equipment, or any component thereof, which is faulty or below standard, as a result of inferior workmanship or materials. 1. This Guarantee shall only apply to defects or faults which are notified to the Company, or its approved Service Facility within two years from the date of purchase of the equipment. 2.
SHARP CORPORATION 22-22, Nagaike-cho, Abeno-ku, Osaka. 545-8522, Japan In Europe represented by SHARP ELECTRONICS EUROPE LTD. 4 Furzeground Way, Stockley Park, Uxbridge, Middlesex, UB11 1EZ, U.K. Printed in Thailand TINS-B326CBRZ 13CK TH (B326).
