SK410 OWNER’S GUIDE WWW.SHARKCLEAN.
IMPORTANT SAFETY INSTRUCTIONS For Household Use Only WHEN USING YOUR SHARK® STEAM & SPRAY™ MOP, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING: WARNING: READ ALL INSTRUCTIONS BEFORE USING YOUR SHARK® STEAM & SPRAY™ MOP. 2. Use the system only for its intended use. DANGER OF SCALDING. Please use caution when using the steam mop. The steam emitted from the steam mop is very hot. POLARIZED PLUG: This appliance has a polarized plug (one blade is wider than the other).
14. DO NOT unplug by pulling on the power cord. To unplug, grasp the plug not the power cord. Do not use extension cords or outlets with inadequate current carrying capacity. 29. DO NOT leave batteries in the unit. Remove the batteries when not in use. 15. DO NOT use for space heating purposes. 31. This unit is not intended for use with rechargeable batteries. Use of rechargeable batteries can damage the unit or lead to other hazards. 16. DO NOT put any objects into openings.
This manual covers model number: SK410 40 TECHNICAL SPECIFICATIONS Voltage: 120V~, 60Hz. Power: 1050 Watts Euro-Pro, Shark, Steam, SaniFiber & Spray, Steam Energized and Rotator are trademarks of Euro-Pro Operating LLC. All other brand names may be trademarks of their respective owners.
Contents Thank you for purchasing the Shark® Steam & Spray™ Mop. Getting Started.................................................................................................... 2 Using Your Shark® Steam & Spray™ Mop........................................................... 4 Cleaning Your Hard Floors................................................................................. 4 Using Steam......................................................................................................
Getting Started When assembling your Steam & Spray™ Mop there may be a little water in the Reusable Bottle. This is because we test all of our products 100% before you buy them, so you get a quality Shark® Steam & Spray™ Mop.
fig. 3 fig. 4 fig. 5 Cleaning Pad fig. 2 fig. 1 IMPORTANT: Always make sure that the Steam & Spray™ Mop is UNPLUGGED from the wall when not in use. Never change or remove the cleaning pad when the appliance is plugged into the wall. Use ONLY Steam Energized™ Cleanser. The addition of other chemicals or cleaning solutions may damage the appliance, void the warranty and could be unsafe for you and your family. ASSEMBLY 1 Insert the handle into the neck of the main body of the Steam & Spray™ Mop.
Using Your Steam & Spray™ Mop IMPORTANT: When cleaning, do not use the Steam & Spray™ Mop without attaching a Cleaning Pad, filling the water tank and the Steam Energized™ Cleanser bottle first. IMPORTANT: When you are using the mop for the first time, it might take longer than the normal 30 seconds to start steaming. fig. 6 fig. 8 fig. 7 Cleaning Your Hard Floors Filling the Water Tank: 1 Turn the water tank cap counter clockwise and remove from the unit. (Fig.
Steam & Spray fig. 9 fig. 10 fig. 12 fig. 13 Spray Only fig. 14 fig. 11 Using Steam: 1 Turn the steam locking collar to the “Steam & Spray” position. (Fig. 9) 2 W ait 30 seconds for the boiler to heat the water. Pump the handle a few times to prime the pump, activate steam and moisten the cleaning pad. (Fig. 10) 3 C lean your floors with a forward and backward motion to customize steam output automatically. (Fig. 11) WARNING: Never stand on the Steam & Spray™ Mop.
Using Your Steam & Spray™ Mop - cont’d Frequently Asked Questions General Tips: Q. My Steam & Spray Mop leaves a foam on hard floors. • C hange the Cleaning Pad frequently for best results. ™ A. T he Steam & Spray Mop™ Washable Cleaning Pad is likely too saturated. Replace it with a clean, dry pad. Q. My floors appear cloudy after cleaning. A. T he Steam & Spray™ Mop Cleaning Pad may be dirty. Change the pad. A.
Care and Maintenance fig. 17 fig. 15 fig. 16 AFTER USE AND STORAGE 1 When you have finished using the Shark® Steam & Spray™ Mop, turn the steam locking collar to the “Spray Only” position. This stops the unit from steaming. Unplug the cord from the electrical outlet and remove the Cleaning Pad from the unit. 2 Empty the water tank before storage. Remove the water tank cap and empty the tank over a sink. Replace the water cap. (Fig.
Troubleshooting Guide PROBLEM POSSIBLE REASONS & SOLUTIONS Shark® Steam & Spray™ Mop will not turn on. 1. M ake sure that the power cord is firmly inserted into the electrical outlet. 2. Check your fuse or breaker. 3. The removable cord may be loose. Please check that the removable cord is firmly inserted into the power cord receptacle. 4. If your unit still does not work, call Customer Service at 1-800-798-7398. Shark® Steam & Spray™ Mop will not make steam. 1.
Notes www.sharkclean.
Notes 10 TOLL FREE: 1-800-798-7398
ONE (1) YEAR LIMITED WARRANTY EURO-PRO Operating LLC warrants this product to be free from defects in material and workmanship for a period of one (1) year from the date of the original purchase, when utilized for normal household use, subject to the following conditions, exclusions and exceptions. If your appliance fails to operate properly while in use under normal household conditions within the warranty period, return the complete appliance and accessories, freight prepaid.
EURO-PRO Operating LLC U.S.: Newton, MA 02459 Canada: Ville St. Laurent, Québec H4S 1A7 1-800-798-7398 www.sharkclean.com COPYRIGHT © 2013 EURO-PRO OPERATING LLC PRINTED IN CHINA Euro-Pro, Shark, Steam & Spray, SaniFiber and Rotator are trademarks of Euro-Pro Operating LLC. SK410_E.130704.2 Illustrations may differ from actual product.
