SK435CO OWNER’S GUIDE WWW.SHARKCLEAN.
IMPORTANT SAFETY INSTRUCTIONS For Household Use Only WHEN USING YOUR SHARK® PROFESSIONAL STEAM & SPRAY™ MOP, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING: WARNING: READ ALL INSTRUCTIONS BEFORE USING YOUR SHARK® PROFESSIONAL STEAM & SPRAY™ MOP. 2. Use the system only for its intended use. DANGER OF SCALDING. Please use caution when using the steam mop. The steam emitted from the steam mop is very hot.
14. DO NOT unplug by pulling on the power cord. To unplug, grasp the plug not the power cord. Do not use extension cords or outlets with inadequate current carrying capacity. 28. Never use the Shark® Professional Steam & Spray™ Mop without the cleaning pad attached. 15. DO NOT use for space heating purposes. 30. DO NOT incinerate batteries or expose them to high temperatures. They may explode. 16. DO NOT put any objects into openings. Do not use with any opening that is blocked. 17.
This manual covers model number: SK435CO 40 TECHNICAL SPECIFICATIONS Voltage: 120V~, 60Hz. Power: 1050 Watts Euro-Pro, Shark, Steam & Spray, Steam Energized and Rotator are trademarks of Euro-Pro Operating LLC. All other brand names may be trademarks of their respective owners.
Contents Thank you for purchasing the Shark® Professional Steam & Spray™ Mop. Getting Started.................................................................................................... 2 Using Your Shark® Professional Steam & Spray™ Mop....................................... 4 Cleaning Your Hard Floors................................................................................. 4 Filling the Water Tank........................................................................................
Getting Started When assembling your Professional Steam & Spray™ Mop there may be a little water in the Reusable Bottle. This is because we test all of our products 100% before you buy them, so you get a quality Shark® Professional Steam & Spray™ Mop.
fig. 3 fig. 4 Cleaning Pad fig. 5 fig. 2 fig. 1 IMPORTANT: Always make sure that the Professional Steam & Spray™ Mop is UNPLUGGED from the wall when not in use. Never change or remove the cleaning pad when the appliance is plugged into the wall. Use ONLY Steam Energized™ Cleanser. The addition of other chemicals or cleaning solutions may damage the appliance, void the warranty and could be unsafe for you and your family.
Using Your Professional Steam & Spray™ Mop IMPORTANT: When cleaning, do not use the Professional Steam & Spray™ Mop without attaching a Cleaning Pad, filling the water tank and inserting the Steam Energized™ Cleanser bottle first. fig. 6 fig. 8 fig. 7 fig. 9 Cleaning Your Hard Floors Filling the Water Tank: 1 Turn the water tank cap counter clockwise and remove from the unit. (Fig. 6) 2 Using the filling flask, pour water into the water tank. Do not overfill. Replace the cap on the water tank. (Fig.
fig. 12 fig. 10 fig. 11 fig. 13 Using Steam: 1 Press the Steam Control button to start the steam mop. (Fig. 10) 2 ait 30 seconds for the boiler to heat the water. W Pump the handle a few times to prime the pump, activate steam and moisten the cleaning pad. 3 lean your floors with a forward and backward C motion. (Fig. 11) 3 P ress the Steam Control button until the light flashes to stop the steam. WARNING: Never stand on the Professional Steam & Spray™ Mop.
Using Your Professional Steam & Spray™ Mop - cont’d Frequently Asked Questions General Tips: Q. My Professional Steam & Spray Mop leaves a foam on hard floors. • hange the Cleaning Pad frequently for best C results. • Always vacuum floors before cleaning. ™ A. T he Professional Steam & Spray™ Mop Cleaning Pad is likely too saturated. Replace it with a clean, dry pad. Q. My floors appear cloudy after cleaning. A. T he Professional Steam & Spray™ Mop Cleaning Pad may be dirty. Change the pad.
Care and Maintenance fig. 16 fig. 14 fig. 15 AFTER USE AND STORAGE 1 When you have finished using the Shark® Professional Steam & Spray™ Mop, press the ON/STANDBY switch until the LED light turns flashing BLUE. This stops the unit from steaming. Unplug the cord from the electrical outlet and remove the Cleaning Pad from the unit. 2 E mpty the water tank before storage. Remove the water tank cap and empty the tank over a sink. Replace the water cap. (Fig.
Troubleshooting Guide PROBLEM POSSIBLE REASONS & SOLUTIONS Shark® Professional Steam & Spray™ Mop will not turn on. 1. M ake sure that the power cord is firmly inserted into the unit power cord receptacle and in the electrical outlet. 2. Check your fuse or breaker. 3. If your unit still does not work, call Customer Service at 1-800-798-7398. Shark® Professional Steam & Spray™ Mop will not make steam. 1. Is there water in the water tank? If not, add water following instructions on page 4. 2.
Notes www.sharkclean.
Notes 10 TOLL FREE: 1-800-798-7398
ONE (1) YEAR LIMITED WARRANTY EURO-PRO Operating LLC warrants this product to be free from defects in material and workmanship for a period of one (1) year from the date of the original purchase, when utilized for normal household use, subject to the following conditions, exclusions and exceptions. If your appliance fails to operate properly while in use under normal household conditions within the warranty period, return the complete appliance and accessories, freight prepaid.
EURO-PRO Operating LLC U.S.: Newton, MA 02459 Canada: Ville St. Laurent, Québec H4S 1A7 1-800-798-7398 www.sharkclean.com COPYRIGHT © 2013 EURO-PRO OPERATING LLC PRINTED IN CHINA Euro-Pro, Shark, Steam & Spray, SaniFiber and Rotator are trademarks of Euro-Pro Operating LLC. SK435CO_E.130718.2-DG Illustrations may differ from actual product.
