Specifications

14 Getting Started
Note: You will not be able to select or enter the category name on this screen.
Follow the next procedure.
Setting your passcode
By setting your own passcode in the Zaurus, you can protect your Zaurus from
unauthorized use. Once you set the passcode enables the Require passcode at
power-on setting. You will be required to enter it every time you turn the Zaurus on.
To skip setting the passcode now, tap “Finish” or . You can enter it later using
the Security application (See the Operation Manual on the CD-ROM).
Caution:
Use this function with care. If you forget your passcode, you will need
to carry out the “Format” in the Maintenance menu. You will lose all
data created and saved as well as any add-on software installed on
the Zaurus.
1. Tap the “Set passcode” button.
2. Enter your passcode and then tap “OK”.
Note:
You can enter passcode using number keys on the screen or alphabets
using the keyboard. Alphabets are distinguished between upper case
and lower case.
3. Enter the same passcode again and then tap “OK”.
To make the Zaurus ask for the passcode at start-up every time you turn it on,
tap the “Require passcode at power-on” checkbox to turn it on.
4. Tap “Finish” or to complete the initial settings.
Once the initial settings are completed, the Home screen will be displayed.
• If you turned on the “Require passcode at power-on” option in step 3, the
passcode entry screen will appear asking for your passcode. Entering the
correct passcode will display the Home screen.
Next, install the software for your PC and the Zaurus from the CD-ROM.