Specifications

Getting Started 17
Installing the PC Software and the USB Driver onto your PC
Using the accompanying CD-ROM, “Intellisync for Zaurus,” “Backup/Restore
application” etc. can all be installed at one time.
Preparation for Installation
1. When installing this software in Windows XP/2000, check the limitations on the
previous page.
2. Close all applications on your PC.
3. Insert the accompanied CD-ROM into your CD-ROM drive.
A menu screen will be displayed automatically.
If the CD-ROM does not launch automatically, open D: setup.exe (use your
CD-ROM drive letter),
Caution
: Do not connect the USB cable between the Zaurus and the PC until
instructed to do so by the software.
Installing the PC software
4.
Click “Install PC Software”, then confirm the displayed contents and click “OK”.
Installation of the software will begin.
Note:
• You can confirm the installation procedures by clicking “Installation Notes”
under “Install PC Software”.
• If the PC Software has already been installed, additional installation or
uninstallation screens will be displayed (See page 20).