Specifications

18 Getting Started

• If the software for the former SL-models has been installed, a confirmation

dialog box for uninstallation of the software will be displayed.

Confirm the message to uninstall the software. After uninstallation, repeat the

procedure from step 3.

5. Follow the on-screen instructions and complete the installation.

Note:

• To install the add-on software or data onto the Zaurus at a later time (See

page 80), be sure to install the “Zaurus File Transfer” beforehand.

• Other software files can be installed later (See page 20).

• Continue the installation even if you receive warning dialog boxes which state

“Software Installation” and “Digital Signature Not Found” if you are using

Windows XP/2000. These are standard error messages which are received

when attaching or unattaching a USB device using Windows XP/2000.

6. When the installation is completed, reboot your PC.

Next, connect the Zaurus to your PC.

7. Connect the AC adapter to the Docking Station, and plug the AC power cord into

an AC outlet.

8. Remove the SHARP I/O PORT cover of the Zaurus, and slide the Zaurus into

the Docking Station.

Note: As for steps 7 and 8, see steps 1 to 4 on page 30 and 31 (“Charging/

Using the Docking Station”).

9. Turn on the Zaurus.

10.

Eject the CD-ROM from your PC and plug the USB connector of the Docking

Station into the USB port of your PC. (Prior to plugging in the USB connector,

turn your PC power on.)

USB connector

USB port