Operation Manual

8 Quick Start
• If a charging error occurs, the LED indicator will flash. Make sure that the AC
power cord and the AC adapter are connected correctly, remove and reinsert
the battery, then perform steps 1 to 3 above again. If the error persists, there
is something wrong with the battery, SL-5500, etc. Contact your local SHARP
dealer for repair.
• The AC power cord plug may differ in some countries.
The SL-5500 has a specified built-in rechargeable back-up battery that
prevents the memory contents from being erased when you replace the
battery.
The rechargeable back-up battery will be charged to its full capacity in 30
hours using the AC adapter or a fully charged “EA-BL06” operating battery.
If you want to replace the operating battery before the rechargeable back-up
battery is fully charged, be sure to connect the AC adapter. (Refer to page
70.)
Step 3
: Pulling out the stylus
This unit comes equipped with a stylus to
select items and enter various kinds of
information, etc.
Pull out the stylus as shown. To replace it,
insert it so that the protruding part of the
stylus locks into place.
Touch the button displayed on the screen
one time to open, select an item, etc.
00 Cover.book Page 8 Saturday, January 19, 2002 11:33 AM