Trim Kit Options

SMC1585BS Convection Microwave Oven with the RK-94S30 Trim Kit
When building-in a Sharp
®
Countertop Microwave Oven, be sure to use the proper Sharp built-in kit. All Sharp kits are UL
approved and provide ductwork to assure proper air circulation around the product. Never enclose a microwave oven
so tightly that air cannot circulate around it. It will not function properly in a tight enclosure. Prepare the cabinet or wall
opening to provide access to a separate 3-pronged, 120V AC outlet of 15 amps or greater. Not all microwave ovens can
be built-in. Check the nameplate located on the inside of the microwave oven for the correct built-in kit. Always refer to
the installation guide for recommendations.
MODEL UPC DESIGNED FOR WIDTH
RK49S27F 074000621046 SMC1842CS and SMC1843CM 27"
RK49S30F 074000621053 SMC1842CS and SMC1843CM 30"
RK56S27F 074000621060 SMC2242DS 27"
RK56S30F 074000621077 SMC2242DS 30"
RK94S27F 074000621084 SMC1585BS 27"
RK94S30F 074000621091 SMC1585BS 30"
Built-In Trim Kits
SMC1585BS Convection Microwave Oven with the RK94S30F Trim Kit
Can Be Used for Both Standard or
Flush Mount Installation
Designed for Sharp
®
Countertop and
Convection Microwave Ovens
Compatible with Sharp
®
Countertop
Microwave Oven Sizes 1.8 cu. ft. and Larger
Stylish Design and a Stainless Steel Finish
Creates a Seamless, Built-in Appearance
Includes Ducting, Finish Trim, and
Easy-to-Follow Instructions
RK49S27F and RK49S30F RK56S27F and RK56S30F RK94S27F and RK94S30F