Installation

4
Figures 4, 5 and 6 contain many Microwave Drawer measurements
for reference when planning the drawer’s location.
This Microwave Drawer can be installed below any electric or
gas wall oven.
30" MICROWAVE DRAWER MEASUREMENTS
A
B
C
D
E
F
G
H
I
J
K
L
M
M
N
O
P
Q
R
Figure 4
A. 84" wall cabinet
B. Optional wall oven cutout illustrated in sketch
C. Suggested electrical outlet location*
D. 6"
E. Anti-Tip block
F. 3 -1/2"
G. 5"
H. 4"
I. 2" minimum
J. 22-1/8" minimum, 28-7/16" maximum
K. Allow 3/16" overlap
L. 14-13/16" to bottom of Anti-Tip block
M. Allow 23/32" overlap
N. 23-1/2" minimum depth
O. 15-9/16" opening
P. Allow 1/8" overlap
Q. Floor must support 100 lb
R. 30" cabinet minimum
* Can also be installed using an electrical outlet in an adjacent
cabinet within the area where the provided electrical cord can
reach. Power cord access hole in cabinet should be a minimum
1
1
/2" diameter hole and deburred of all sharp edges.
IMPORTANT
Always allow sufcient power cord length to the
electrical outlet to prevent tension.
Always check electrical codes for requirements.