Flush Mount Installation Instructions

ManualsBrandsSharp ManualsMicrowave DrawersSharp Stainless Steel 24" Microwave Drawer Oven

E 1

Note: the face of the shelf must

sit 1

/4" (44.45 mm) back from

the face of the cabinet.

cabinet face

shelf face

24" FLUSH MOUNT DEFLECTOR VENT: SKMD24F0AS

INSTALLATION INSTRUCTIONS

1. Prepare cabinet opening as shown in Figures 1, 2A, 2B, 2C.

Top view

Anti-Tip block

Mounting cleat

Drawer face

Cabinet

face

Note: the mounting surface of the finished cleat must sit 1

/16" (26.97 mm) back

from the face of the cabinet [pushing the face of the drawer out

/4" (6.35 mm)].

Figure 1

Figure 2A

IMPORTANT NOTES TO THE INSTALLER

ÊU Read all of the Installation Manual that is included with





ÊU Observe all governing codes, ordinances, and safety

instructions.

ÊUÊÊ

Parts includes:

Qty. Part number

PREF-B019MRP0

Flush Mount



LX-CZB055MRE0

Mounting screws

TINSEB541MRR2

 

B. Suggested electrical outlet location

C. Anti-Tip block

 

 

 

 



 

Anti-Tip block

 

 

 

 



 



 

 

 

Summary of content (4 pages)

PAGE 1
24" FLUSH MOUNT DEFLECTOR VENT: SKMD24F0AS INSTALLATION INSTRUCTIONS IMPORTANT NOTES TO THE INSTALLER Parts includes: Qty. Ê U Read all of the Installation Manual that is included with Part number PREF-B019MRP0 Flush Mount 1 Ê U Observe all governing codes, ordinances, and safety instructions. Ê UÊÊ 2 LX-CZB055MRE0 Mounting screws 1. Prepare cabinet opening as shown in Figures 1, 2A, 2B, 2C. A B E D F G I B. Suggested electrical outlet location C.
PAGE 2
3. Place the drawer adjacent to the wall or cabinet opening. Plug the power supply cord into the electrical outlet. No oven A Suggested electrical outlet location 4. Carefully guide the drawer into the prepared opening. Avoid contact with the sides of the cutout opening and also pinching the cord between the oven and the wall. Anti-Tip block B C Front view Figure 2B Mounting flange Move oven location downward for extended countertops for better viewing angle. 16 7/8" (428.
PAGE 3
0" FLUSH MOUNT DEFLECTOR VENT: SKMD30F0AS INSTALLATION INSTRUCTION IMPORTANT NOTES TO THE INSTALLER Parts includes: Qty. Ê U Read all of the Installation Manual that is included with Part number PREF-B020MRP0 Flush Mount 1 Ê U Observe all governing codes, ordinances, and safety instructions. Ê UÊÊ LX-CZB055MRE0 Mounting screws 2 1. Prepare cabinet opening as shown in Figures 1, 2A, 2B, 2C. A B C G I F H Note: the face of the shelf must sit 1 3/4" (44.45 mm) back from the face of the cabinet.
PAGE 4
3. Place the drawer adjacent to the wall or cabinet opening. Plug the power supply cord into the electrical outlet. No oven A Suggested electrical outlet location 4. Carefully guide the drawer into the prepared opening. Avoid contact with the sides of the cutout opening and also pinching the cord between the oven and the wall. Anti-Tip block B C Front view Figure 2B Mounting flange Move oven location downward for extended countertops for better viewing angle.