SKMD30E9ES 30 Inch Extension Kit Installation Instructions

E 3

7. Remove the 2 trim screws from each mounting bracket to begin

installation.

Note: The mounting brackets come assembled to the side

trims.

8. Open the drawer to properly align brackets to microwave side

rails. See Figure 5.

Bracket

Side rails

Align sides and bottom of the 30"

mounting brackets to the sides and bottom

of the microwave drawer side rails

Figure 5

9. Using the 4 holes on each bracket as a template, pre-drill the

cabinet using a

/16" (1.6 mm) bit. Secure the mounting brackets

to cabinet with the 8 bracket screws provided. See Figure 6.

Figure 6

10. Place side trims on top of the mounting brackets, aligning the

screw holes.

Note: Each side trim is marked "L" and "R" on the back

side to indicate Left and Right.

11. Mount the Left and Right 30" trim extensions using the 4 trim

screws provided. See Figure 7.

Figure 7