Installation Instructions

Connecting Ductwork

Extend the house duct down to connect to the exhaust adapter.

Seal exhaust duct joints using duct tape.

Figure 25

Figure 24

Figure 26

Figure 27

House Duct

Install the grease filters

How to replace the Charcoal filter

1. Unplug the oven or turn off the power at the main power

supply.

2. Remove the grille air mounting 3 screws and open the

door. See Figure 26.

3. Slide the grille air to the left, then pull it straight out.

4. Push the charcoal filter backwards and remove it.

5. Slide a new charcoal filter into place. The filter should rest

at the angle. See Figure 27.

6. Replace the grille air and 3 screws and close the door.

7. Plug the oven in or turn on the power at the main power

supply.

CHARCOAL FILTER

GRILLE AIR

Step 4.

Then insert a bolt down through each hole in the upper

cabinet bottom.

Tighten the bolts until the gap between the upper cabinet

and microwave oven is closed. See Figure 24.