SMO1854DS Installation Guide

4
7 VENTILATION SYSTEM
This Microwave Oven/Hood System is designed for adaptation to three types of hood ventilation
systems. Select the type required for your installation.
A. RECIRCULATING—Non-Vented, Ductless Operation
The unit is shipped assembled for recirculating.
NOTE:
1. The Exhaust Damper Assembly is not required for recirculating operation.
2. The Charcoal Filter should be replaced every 6 months, depending on use.
3. The Charcoal Filter is also sold as an accessory. See Operation Manual for ordering information.
B. Horizontal Ventilation System
Step 1.
* Remove the screws (1) and (2) for opening
the blower motor cover and save screws.
Remove cover. See Figure 6.
Step 2.
* Remove the screws (3) for Blower
attachment and save screws. See Figure 7.
* Lift blower unit out of mounting location. See
Figure 8.
CAUTION:
Do not pull or stretch blower wiring.
Figure 7 Figure 8
Blower motor
Before : Fan blade openings facing Front
Blower motor cover
Back of OVEN
Figure 6