Instruction manual

9-22
9
Additional Settings
2
Select from Image 1 to Image 5 and press N l
C To overwrite saved portrait, choose Yes A Press b
C To delete portraits, select one A Press M . A Choose
Yes A Press b
B Deleting all portraits cancels Face Recognition.
3
Frame your face on Display and press b
^ Stay still until shooting is completed.
^ If Cannot Register. Please change the shooting condition.
appears, start over from Step 2.
4
Press N i
Portrait is saved.
5
Choose Yes and press b
Face Recognition is activated.
^ To save more, repeat Steps 2 - 4.
^ To save user information, press i then M q.
^ Save a user beforehand.
^ Face Recognition is Off by default.
1
Choose On or Off and press b
2
Enter Handset Code and press b
Face Recognition window opens when handset is turned
on, opened in Standby, or whenever Display is refreshed
after Display Saving time, etc.
^ Clean dust/smudges from lens cover of Internal Camera with a
soft cloth before use.
^ When another function is active, etc., Face Recognition
window may not open right away. Cancel the function to open
Face Recognition window.
1
Face the Display
^ To show operational tips, select Panda in Conductor Setting
(see P.9 -2 3).
^ Handset is unlocked when your face matches saved portrait.
Note H Do not wear a mask when capturing portraits, even for
use with Low(Mask) (see P.9-24 "Security Level").
Activating & Cancelling
Main Menu
H Settings A Phone Settings (F) A Locks A Face
Recognition A Switch On/Off
Tip H
Activate to automatically lock handset when it is turned
on, opened in Standby, or whenever Display is refreshed
after Display Saving time, etc.
Scanning Face