Instruction manual

10-13
10
Connectivity
4
Transfer starts and confirmation appears
C Press M 3 to cancel.
C Press g to end.
5
Choose Yes and press b to save
C To cancel transfer, choose No A Press b A Choose Yes A
Press b
C For Data Folder files, select Phone or Memory Card A
Press b
B Files are automatically saved to handset or Memory Card
depending on available memory.
CSending
1
Select Send All and press b
2
Choose Yes and press b
Offline Mode is set.
3
Enter Handset Code and press b
4
Select an item and press b
5
Prepare recipient device
6
Enter Authorisation Code and press b
Transfer starts. When finished, Send All menu returns.
C For Phone Book, choose Yes or No A Press b
CReceiving
1
Choose On (3 min.) and press b
Infrared is activated and handset returns to Standby.
^ Acquire infrared transmission within three minutes.
2
When connection is requested, Calling not
available during operation, OK? appears
3
Choose Yes and press b
Offline Mode is set.
4
Enter Authorisation Code and press b
^ Enter the same Authorisation Code as sender's.
5
Transfer starts and confirmation appears
C Press M 3 to cancel.
C Press g to end.
6
Adding Files
1 Select As New Items and press b
When transfer completes, handset returns to Standby.
C Press M 3 to cancel.
C Press g to end.
Note H
^ Handset must be in Standby to receive files; this
function is disabled even in Standby if Password Lock/
Keypad Lock is active or firmware update is in progress.
^ High-speed infrared transfer supports JPEG files only.
Send up to 1.8 MB per transfer to 812SH or 813SH.
All File Transfer
Main Menu H Settings A Connectivity (F) A Infrared
Main Menu
H Settings A Connectivity (F) A Infrared A Switch
On/Off