Instruction manual

10-14
10
Connectivity
Overwriting Existing Files
1 Select Delete All & Save and press b
2 Choose Yes and press b
3 Enter Handset Code and press b
When transfer completes, handset returns to Standby.
^ When Phone Book is overwritten, My Details except
handset phone number is overwritten as well.
C Press M 3 to cancel.
C Press g to end.
Receive folders from compatible devices and save to
handset Data Folder.
^ Handset does not support sending folders.
^ Handset receives folders when it can newly create a folder, or
the same folder name exists in the same layer as that of
sender's.
^ For sender's procedures, see the device manual.
1
Choose On (3 min.) and press b
Infrared is activated and handset returns to Standby.
^ Acquire infrared transmission within three minutes.
2
When connection is requested, Calling not
available during operation, OK? appears
3
Choose Yes and press b
Offline Mode is set and transfer starts. When finished, handset
returns to Standby.
^ If the same folder name exists, received files are saved there.
C Press M 3 to cancel.
C Press g to end.
See P.2-16 for information on Select Service.
KAutomatic
Select Manual A Press b A Select a Network A
Press b
C To change Network automatically, select Automatic A
Press b
^ Use default setting unless connecting to a specific Network.
Inserting Network
Select a place to insert A Press b A Select Insert
A Press b A Select a Network A Press b
^ Network is inserted above the selected entry.
Receiving Folders
Main Menu
H Settings A Connectivity (F) A Infrared A Switch
On/Off
Network Settings
Select Network Select a Network to connect
Main Menu
H Settings A Network Settings (F) A Select
Network
Set Preferred
Set priority of Networks to be selected when
Automatic is set for Select Network
Main Menu
H Settings A Network Settings (F) A Select
Network A Set Preferred