Instruction manual

17-6
17
S! FeliCa (Japanese Only)
CCall Remote Lock Number/Count for Lock
Save up to two phone numbers from which to call handset,
and set Missed Call count required to activate IC Card Lock
(default count is 3 times).
Enable Remote Lock activation via public phones.
1
Enter Handset Code and press b
2
Select Call Remote Lock and press b
3
Select Phone No. to Lck 1 and press b
C To enable activation via public phone, select Set Public
Phone A Press b A Choose On A Press b
C To disable activation via public phone, choose Off.
4
Select Phone Book or Enter Number and press b
5
Select/enter a phone number and press b
C To save second phone number, select Phone No. to Lck 2
A Press b A Repeat Steps 4 - 5
6
Select Count for Lock and press b
^ 3 times is set by default.
7
Enter Missed Call count (3 - 10 consecutive times)
required to activate IC Card Lock and press
b
^ To enable Call Remote Lock, perform from Step 3 in "Remote
Lock Setup" below and choose On in Step 4.
8
To save settings without enabling Mail Remote
Lock, press M q
Activate or cancel Mail Remote Lock/Call Remote Lock.
Both Remote Locks are Off by default.
1
Enter Handset Code and press b
2
Select Mail Remote Lock or Call Remote Lock
and press b
3
Select Switch On/Off and press b
4
Choose On and press b
C To cancel, choose Off A Press b
B Saved mail address and phone numbers remain.
Reactivate Remote Lock to use the same setting.
5
Press M q
Main Menu H Lifestyle-appli A IC Card Settings A Remote Lock
Remote Lock Setup
Main Menu H Lifestyle-appli A IC Card Settings A Remote Lock