HT-SB60 SERVICE MANUAL No. S8232HTSB60HE SOUND BAR HOME THEATER SYSTEM MODEL HT-SB60 [For Europe, U.K.] HT-SB60 Sound Bar Home Theater system consisting of HT-SB60 (sound bar system) and CP-SW60 (active subwoofer system). 3D AUD IO • In the interests of user-safety the set should be restored to its original condition and only parts identical to those specified be used. TREBLE BASS CONTENTS PRECAUTIONS FOR USING LEAD-FREE SOLDER CHAPTER 1.
HT-SB60 PRECAUTIONS FOR USING LEAD-FREE SOLDER 1. Employing lead-free solder "MAIN/AMPLIFIER, DISPLAY, SUBWOOFER, REGULATOR, S M P S ( A M P L I F I E R ) , SMPS (SUBWOOFER), HDMI, TRANSMIT, RECEIVE PWB" of this model employs lead-free solder. The LF symbol indicates lead-free solder, and is attached on the PWB and service manuals. The alphabetical character following LF shows the type of lead-free solder. Example: Indicates lead-free solder of tin, silver and copper. 2.
HT-SB60 CHAPTER 1. GENERAL DESCRIPTION [1] Safety Precaution For Service Manual WARNING This unit contains no user serviceable parts. Never remove covers unless qualified to do so. This unit contains dangerous voltages, always remove mains plug from the socket before any service operation and when not in use for a long period. [2] Important Service Notes (for U.K.
HT-SB60 [4] Names Of Parts 2 1 Sound Bar Front Panel 1. Left Channel Speakers 2. Right Channel Speakers 3. On/Stand-by Button 4. SOURCE Button 5. Pairing Button 6. Remote Sensor 7. Demo Indicator 8. Sound Mode Button 9. Volume Down Button 10. Volume Up Button 3 4 5 6 7 8 9 10 Display 1 2 1. Dolby Digital Indicator 2. DTS Indicator 3. Muting Indicator DIGITAL 3 DIGITAL Sound Bar Rear Panel 1. HDMI OUT (TV ARC) Socket 2. HDMI IN 1 Socket 3. HDMI IN 2 Socket 4. Optical IN Socket 5.
HT-SB60 Remote Control 1 1. Remote Control Transmitter 2. TV ARC Button 3. Music (Sound Mode) Button 4. Cinema (Sound Mode) Button 5. Sport (Sound Mode) Button 6. BYPASS Button 7. 3D AUDIO Button 8. APC Button 9. TV Operation Button 10. AV SYNC Down Button 11. Source Button 12. Subwoofer Level Down Button 13. Bass Button 14. On/Stand-by Button 15. Game (Sound Mode) Button 16. News (Sound Mode) Button 17. Night (Sound Mode) Button 18. Dimmer Button 19. Demo Button 20.
HT-SB60 CHAPTER 2. ADJUSTMENTS [1] Test Mode 1. Enter the Test Mode version display While pressing down ON/STANDBY and SOURCE button, ON AC supply. Version will be displayed as below :SB60 XXXX --> DHHHHHHH --> TX Ver : XXXX --> RX Ver : XXXX --> Press SOUND MODE key at main unit to toggle between display.
HT-SB60 [2] Abnormal detection distinction at DEMO indicator (LED_red) It has a case that need to Power OFF immediately after detected an abnormal condition without display any error indication due to safety matter. In such case, a trouble point can be judged by a distinction indication at DEMO indicator which current is being supplied during Power off. Basically, it is decided to be distinguished which input port of the system microcomputer was detected or which communication information was detected.
HT-SB60 4. As for subwoofer Abnormal Detection, there are 3 types of detection. The detection is by simple RED LED flashing indicating Abnormal Status. No Abnormal Detect (1) Repeated Bus Error Red LED blinking for 2 times and pause cycle. (2) System Protect Red LED blinking for 4 times and pause cycle. (3) AMP Shutdown Red LED blinking for 5 times and pause cycle. Process [3] Manual pairing between the Amplifier and Subwoofer.
HT-SB60 Service Manual E Market CD-ES700/CD-ES77 CHAPTER 3. MECHANICAL DESCRIPTION [1] Disassembly Caution On Disassembly Follow the below-mentioned notes when disassembling the unit and reassembling it, to keep it safe and ensure excellent performance: 1. Take compact disc out of the unit. 2. Be sure to remove the power supply plug from the wall outlet before starting to disassemble the unit. 3. Take off nylon bands or wire holders where they need to be removed when disassembling the unit.
HT-SB60 (D1) x 4 Special Screw ACTIVE SUBWOOFER SYSTEM STEP REMOVAL PROCEDURE FIGURE 1 Main Chassis 1. Screw...................(A1) x 4 4 2. Screw...................(A2) x 4 4 3. Screw...................(A3) x 4 4 4. Rear Panel...........(A4) x 1 4 5. Socket .................(A5) x 2 5 2 Subwoofer PWB 1. Screw...................(B1) x 4 5 2. Socket .................(B2) x 1 3. Flat Cable ............(B3) x 1 3 Receive PWB 1. Screw...................(C1) x 1 5 4 SMPS (Subwoofer) 1. Screw...................
HT-SB60 CHAPTER 4. CIRCUIT DESCRIPTION [1] Waveform Of Wireless Transmission During AUDIO IN function 1 7 2 8 SCL SDA Fig.
HT-SB60 [2] Voltage Main PWB (Tx) IC500 Pin No. 1 Pin Voltage (V) No. 7.50m 21 Pin Voltage (V) No. 3.30 IC501 Pin Voltage (V) No. 41 2.10m 61 Pin Voltage (V) No. 3.70m 81 IC502 Voltage (V) Pin No. Voltage (V) Pin No. Voltage (V) 1 3.31 1 4.25 5 0.62 0.63 Voltage (V) Pin No. 3.30m 2 7.20m 22 7.10m 42 6.10m 62 3.30 82 1.29 2 3.31 2 1.26 6 3 8.70m 23 7.20m 43 3.20 63 3.30 83 2.34 3 0.00 3 1.24 7 4.38 4 7.70m 24 1.32 44 3.30 64 1.90m 84 4.
HT-SB60 IC100 Pin No. Pin Voltage (V) No. Pin Voltage (V) No. Pin Voltage (V) No. Voltage (V) Pin No. Voltage (V) Pin No. Voltage (V) Pin No. Voltage (V) Pin No. Voltage (V) 1 3.28 17 0.74 33 1.60 49 3.28 65 2.62 81 3.27 97 3.10m 113 4.80m 2 3.28 18 1.30 34 1.60 50 3.30 66 3.28 82 1.70 98 4.80m 114 4.70m 3.70m 3 3.27 19 0.20m 35 17.40m 51 1.64 67 1.00m 83 1.70 99 3.60m 115 4 3.28 20 1.55 36 1.30m 52 1.70m 68 3.27 84 3.28 100 3.
HT-SB60 Subwoofer (Rx) ICX601 Pin No. Pin Voltage (V) No. Pin Voltage (V) No. ICX901 Pin Voltage (V) No. Voltage (V) Pin No. Pin Voltage (V) No. Voltage (V) Pin No. Voltage (V) Pin No. Voltage (V) 31.00 1 1.79 17 1.91 33 1.87 49 2.30 1 11.98 12 3.20 23 12.03 34 2 49.90m 18 10.90m 34 38.10m 50 2.30 2 3.21 13 2.40m 24 31.00 35 30.90 3 0.77 19 1.07 35 39.80m 51 2.30 3 2.10m 14 3.20 25 0.00 36 22.00 4 0.85 20 1.07 36 3.23 52 2.30 4 2.
HT-SB60 CHAPTER 5. FLOWCHART [1] Troubleshooting 1. When unable to “pair” or “link” between the sound bar unit and subwoofer. ( 1 ) Transmitting and receiving check. 1. Is the TX and RX module supply + UN_SW5V ok? NO Check incoming supply. (Rx - CNP600X Pin no. 1 and 2) (Tx - CNP502 Pin no. 1 and 2) NO Is the module FFC loose ? YES 2. Is the communication signal ( I2C ) ok ? (Fig. 1 - During AUDIO IN function) (Fig.
HT-SB60 CHAPTER 6. MAJOR PART DRAWING [1] Function Table Of IC IC500 RH-IXA348AW00 : SYSTEM MICROCONTROLLER (IXA348AW) (1/5) Pin No. 1 2 3 4 5 6 NAME PORT_TYPE NO USE P96/ANEX1 NO USE P95/ANEX0 NO USE P94 NO USE P93 NO USE P92/TB2IN NO USE P91/TB1IN INPUT/ OUTPUT FORM OUTPUT CMOS INPUT/OUTPUT OUTPUT CMOS INPUT/OUTPUT (Schmitt Input) OUTPUT SOFT PULLUP EXT.
HT-SB60 IC500 RH-IXA348AW00 : SYSTEM MICROCONTROLLER (IXA348AW) (2/5) Pin No. 27 28 NAME PORT_TYPE NO USE P73/CTS2/RTS2/TA1IN NO USE SOFT PULLUP INPUT/ OUTPUT FORM OUTPUT CMOS INPUT/OUTPUT (Schmitt Input) EXT.
HT-SB60 IC500 RH-IXA348AW00 : SYSTEM MICROCONTROLLER (IXA348AW) (3/5) Pin No.
HT-SB60 IC500 RH-IXA348AW00 : SYSTEM MICROCONTROLLER (IXA348AW) (4/5) Pin No.
HT-SB60 LVL_DETECT 81 P07/AN07 AVCK1 82 P06/AN06 AVCK2 83 P05/AN05 NO USE P04/AN04 PREOUT_MUTE 85 84 P03/AN03 NO USE 86 P02/AN02 NO USE 87 P01/AN01 NO USE 88 P00/AN00 NO USE P107/AN7/KI3 POWER(DC RELAY) 90 89 P106/AN6/KI2 SYS_PROTECT 91 P105/AN5/KI1 NO USE NO USE 93 92 P103/AN3 P104/AN4/KI0 NO USE 94 P102/AN2 AREA 95 P101/AN1 GND 96 AVSS VREF 97 NO USE 98 VREF P100/AN0 AVCC 99 AVCC P97/ADTRG 100 NO USE IC500 RH-IXA348AW00 : SYSTEM MICROCONTROLLER (IXA348AW) (5/
HT-SB60 IC1 VHiEP92A2E : HDMI IC (EP92A2E) (1/4) Unless otherwise stated, unused input pins must be tied to ground, and unused output pins left open.
HT-SB60 IC1 VHiEP92A2E : HDMI IC (EP92A2E) (2/4) Audio Inputs/Outputs Name In/Out Description MCLK OUT System Clock output for audio DAC (128/256/384/512 * FSampling_Clock. Connecting a pull-up (logic 1) or pull-down (logic 0) resistor at this pin de nes bit 4 of the slave IIC Address IIS_SCK OUT IIS SCK output for IIS audio port. Sampling clock output for DSD. IIS_WS OUT IIS WS output for all IIS audio ports. DSD audio output port 0 (Right Channel).
HT-SB60 IC1 VHiEP92A2E : HDMI IC (EP92A2E) (3/4) HDMI Controller Pins1 Name In/Out Description MCU_RSTb IN External Reset (active low) with on-chip pull-up. When this pin is asserted low, the HDMI controller is totally reset. MCU_OP IN HDMI Controller operation mode. 0: Normal mode 1: ICP (In Circuit Flash Programming) mode MCU_XIN IN External Crystal Input, 18.432 Mhz External Crystal Output, 18.432 Mhz. MCU_XOUT OUT P2[7:0] IN/OUT GPIO port 2 with programmable Open Drain capability.
HT-SB60 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 IIS_SD0 IIS_WS IIS_SCK MCLK SPDIF VDD18 VSSE PLL_XFC_A VDD_PLL X_IN EXT_RSTb INTb IIS_SD1 IIS_SD2 IIS_SD3 REG_VO2 REG_VO1 REG_VIN COMR AVSS TX2+ TX2AVDD18 TX1+ TX1AVSS TX0+ TX0AVDD18 TXC+ TXCAVSS IC1 VHiEP92A2E : HDMI IC (EP92A2E) (4/4) EP92A2E 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 1
HT-SB60 [2] FL Display FL700 VVKNA16SM21-1 GRID ASSIGNMENT 15G Dp 16G Dp Dp Dp Dp Dp col col Dp 13G 14G 12G 11G 10G 9G 1-1 2-1 1-2 1-5 1-6 1-7 2-5 2-6 2-7 4-5 3-6 3-7 3G 2G 1G 5-4 5-5 4-6 4-7 4G 5-3 4-4 3-5 Dp 5G 5-2 4-3 3-4 Dp 6G 5-1 4-2 3-3 2-4 7G 4-1 3-2 2-3 1-4 3-1 2-2 1-3 Dp 8G 5-6 5-7 ANODE CONNECTION 16G 15G P1 P2 P3 P4 P5 P6 P7 P8 P9 P10 P11 P12 P13 P14 P15 P16 P17 P18 P19 P20 P21 P22 P23 P24 P25 P26 P27 P28 P29 P30 P31 P32 P33 P34 P35 14G 1 1
HT-SB60 CHAPTER 7. DIAGRAMS [1] Main (Tx) & Subwoofer (Rx) Block Diagram UN-SW+5V HDMI IN 2 J3 HDMI OUT (TV ARC) J4 MAIN (Tx) UN-SW+3.3V S/PDIF IC101 DIR CIRRUS CS8416 SW+3.3V SW+1.8V 8:2MUX S/PDIF OPTICAL IN I 2 S (Digital) AUDIO IN CONTROL PORT & REGISTERS FORMAT DETECT SW+5V RMCK SERIAL CONTROL 2 PARALLEL CONTROL D+3.3V GPIO M12L161A-ST COYOTE 32BIT DSP A X P Y D M A STC COYOTE 32BIT DSP B TMR1 XTL IN P X Y TMR2 12.
HT-SB60 -MEMO- 7–2
HT-SB60 -MEMO- 7 – 31
HT-SB60 CHAPTER 8. CIRCUIT SCHEMATICS AND PARTS LAYOUT [1] Notes On Schematic Diagram • Resistor: To differentiate the units of resistors, such symbol as K and M are used: the symbol K means 1000 ohm and the symbol M means 1000 kohm and the resistor without any symbol is ohm-type resistor. Besides, the one with “Fusible” is a fuse type. • Capacitor: To indicate the unit of capacitor, a symbol P is used: this symbol P means pico-farad and the unit of the capacitor without such a symbol is microfarad.
HT-SB60 [3] Schematic Diagram A OPTICAL IN MAIN/AMPLIFIER PWB-A1 B SIGNAL FLOW WIRE G TO CS 1 AUDIO (ANALOG SIGNAL) AUDIO (DIGITAL SIGNAL) AUDIO IN A023 D FROM HDMI PWB-C J5 C R202 A268 A268 A268 A268 A268 A268 A268 A268 A268 R840 A268 LN-A013 C127 0.01 A268 A268 A268 A268 A268 L800 C836 0.
L800 SMPS (A LN-A367 JP801 LN-0077 LN-A367 FB803 CNP700 TO DISPLAY PWB-A HT-SB60 C836 0.01 LN-A367 FB800 A CS 2 LN-A367 E REGULATOR PWB-A4 CS 1 FOR MICOM REFLASH R804 LN-0110 LN-0110 B B716AW 0 C R646 1K R545 0 0 Q601 KRC102S Q602 KRC102S R590 R591 L900 0 L901 F0015SW R592 ZA152 0 R593 0 R594 WOOFER TWEETER 2.
HT-SB60 SUBWOOFER BOX A TO RECEIVE PWB-F (RX MODULE) J1 RX FLASH TERMINAL SUBWOOFER PWB-A3 CON2 C FROM SMPS (SUBWOOFER) PWB-C B D E A F SUBWOOFER G SIGNAL FLOW A AUDIO (ANALOG) AUDIO (DIGITAL) H 1 2 3 4 5 7 6 8 Figure 8-3: SUBWOOFER (RX) SECTION SCHEMATIC DIAGRAM 8–4 9 10 11 12
HT-SB60 A B C D E G CNP803 FROM MAIN / AMPLIFIER PWB-A1 F ON / STAND-BY SOURCE PAIRING EQ VOL (-) VOL (+) H 1 2 3 4 5 7 6 Figure 8-4: DISPLAY SCHEMATIC DIAGRAM 8–5 8 9 10 11 12
HT-SB60 U2 UTC1117A A HDMI MUX 4 2V1 C10 47uF + C11 0.1u C12 47uF C13 0.1u C15 2.2uF R12 X18432K EP92A2S_RSTb INTb 4.7n R10 SPDIF POWER SUPPLY IICA C19 1u C30 0.1u RX_AVDD33 C20 0.
HT-SB60 J4 P0_5V J2 C 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 TX2P TX2M R48 47K TX1P TX1M P0_5V R58 0 RX0_HPD R56 0 DDC_SCL0 P0_PWR5V DDC_SDA0 DDC_SCL0 DDC_SDA0 rxSDA0 R51 0 R61 510K RX00P RX00M RXC0P RX00M RXC0P RXC0M RX00P RX10M 1 2 3 4 5 I1 I2 GND I3 I4 R63 10K RX20P 10 RX00P 9 RX00M O3 O4 7 RXC0P 6 RXC0M RX20P RX20M 1 2 3 4 5 HT0_CTLb RX10P RX10M I1 I2 GND I3 I4 10 RX20P 9 RX20M O3 O4 7 RX10P 6 RX10M O4 O3 R69 R70 0_0402 0_0402 TX1P_A0 9 TX1M_A0 1
HT-SB60 [4] Chart Of Connecting Wires SOUND BAR SYSTEM 1 1 FROM HDMI PWB (CHASSIS) BK 24 1 HDMI OUT (TV ARC) J4 J2 HDMI IN 1 WIRE C HDMI REFLASH TERMINAL HDMI PWB-D 1 1 HDMI IN 2 1 2 3 4 5 6 7 8 9 10 11 FFC502 DISPLAY PWB-A2 J5 CNP700 1 BK RD BK BK BK BK BK BK BK BK BK WH CNS801 1 2 3 4 5 6 7 8 9 1011 B (Not Serviceable Item) 1 JR1 J3 TRANSMIT PWB-E J1 A FL DISPLAY TO CHASSIS (TRANSMIT PWB) CORE 3 FL700 (RING WITH 3 TURN) FFC600X 2.
HT-SB60 [5] Wiring Side Of PWB TO BOTTOM PWB MAIN/ AMPLIFIER PWB-A1 WIRE G BK A 1 2 2 1 2 4 6 8 10 12 14 1 3 5 7 9 11 13 24 CS1 B CS2 W IR E E BK BK C 7 6 5 4 3 2 4 3 2 1 1 1 2 3 4 5 2 1 WIRE F 1 2 3 4 5 6 7 8 9 10 D Top View TO CS1 WIRE G IMPORTANT NOTE AFTER SERVICING MAIN PWB, PLEASE ENSURE THE COPPER SHEETS (CS1 & CS2) MUST REARRANGED TO WHERE THEY WERE BEFORE DESOLDERING.
HT-SB60 A DISPLAY PWB-A2 1 B C Top View D E F Bottom View G Lead-free solder indication H Lead-free solder is used in the DISPLAY PWB. Refer to "Precautions for handling lead-free solder" for instructions and precautions.
HT-SB60 A SUBWOOFER PWB-A3 1 2 3 4 5 6 7 8 9 10 11 B C 3 2 1 D Top View Bottom View REGULATOR PWB-A4 E F G Top View Bottom View Lead-free solder indication H Lead-free solder is used in the SUBWOOFER & REGULATOR PWB. Refer to "Precautions for handling lead-free solder" for instructions and precautions.
HT-SB60 A HDMI PWB-D B 1 C 11 GND OUT IN D E F Top View Bottom View G Lead-free solder indication H Lead-free solder is used in the HDMI PWB. Refer to "Precautions for handling lead-free solder" for instructions and precautions.
HT-SB60 -MEMO- 8 – 13
HT-SB60 -MEMO- 1 8 – 14
HT-SB60 PARTS GUIDE SOUND BAR HOME THEATER SYSTEM MODEL HT-SB60 [For Europe, U.K.] HT-SB60 Sound Bar Home Theater system consisting of HT-SB60 (sound bar system) and CP-SW60 (active subwoofer system). CONTENTS [1] INTEGRATED CIRCUITS [7] RESISTORS [2] TRANSISTORS [8] OTHER CIRCUITRY PARTS [3] DIODES [9] SOUND BAR PARTS [4] COILS [10] ACTIVE SUBWOOFER PARTS [5] CRYSTALS / VIBRATORS [11] ACCESSORIES / PACKING PARTS [6] CAPACITORS [12] P.W.B.
HT-SB60 NO.
HT-SB60 NO. PARTS CODE PRICE NEW PART RANK MARK RANK DESCRIPTION [3] DIODES U10 U11 ZD563 ZDX807 ZDX808 ZDX811 RH-VXA003AWZZ RH-VXA003AWZZ RH-EXA686WJQZ RH-EXA716WJQZ RH-EXA701WJQZ RH-EXA694WJQZ AE AE AB AB AB AB Array Array Zener, 3.3V Zener Zener, 6.
HT-SB60 NO. PARTS CODE PRICE NEW PART RANK MARK RANK DESCRIPTION [4] COILS R625 R626 R627 R631 R840 R842 RX624 RX625 RX626 RX627 RX631 RBLN-0006TAZZ RBLN-0006TAZZ RBLN-0006TAZZ RBLN-0006TAZZ RBLN-A013AWZZ RBLN-A367WJQZ RBLN-0258TAZZ RBLN-0258TAZZ RBLN-0258TAZZ RBLN-0258TAZZ RBLN-0258TAZZ AA AA AA AA AC AB AA AA AA AA AA Balun Balun Balun Balun Ferrite Bead Chip Ferrite Bead Coil Coil Coil Coil Coil AD AF AE AE AD AE Crystal, 13.50 MHz Crystal, 12.2880 MHz Crystal, 32.
HT-SB60 NO.
HT-SB60 NO.
HT-SB60 NO.
HT-SB60 NO. PARTS CODE PRICE NEW PART RANK MARK RANK DESCRIPTION [6] CAPACITORS CX960 CX961 CX962 CX963 CX964 CX965 CX966 CX994 CX995 CX996 CX997 RX9 RC-KZA733WJZZ VCKYCY1HB104K VCKYCY1HB104K VCKYCY1HB102K VCKYCY1HB102K VCKYCY1HB103K VCKYCY1HB103K VCKYCY1HB104K VCKYCY1HB104K VCKYCY1HB104K VCCCCZ1HH330J VCKYCY1HB104K AC AD AD AA AA AA AA AD AD AD AB AD 0.1 µF, 50V 0.1 µF,50V 0.1 µF,50V 1000 pF, 50V 1000 pF, 50V 0.01 µF, 50V 0.01 µF, 50V 0.1 µF,50V 0.1 µF,50V 0.1 µF,50V 33 pF (CH), 50V 0.
HT-SB60 NO.
HT-SB60 NO.
HT-SB60 NO.
HT-SB60 NO.
HT-SB60 -MEMO- 12
HT-SB60 [9] SOUND BAR PARTS 605 x 5 212 222 202 206 218 228 210 CORE5 221 231 203 224 604 604 x 19 232 219 204 604 205 604 x 2 220 x 2 212 607 x 2 PWB-B 214 x 2 607 x 2 603 x 2 225 PWB-A4 219 607 211 215 603 601 x 2 PWB-A1 227 607 x 2 606 x 2 220 x 2 218 PWB-D 227 221 606 CORE3 224 221 CORE1 602 x 4 602 x 4 230 602 x 4 221 CORE2 SP5 207 x 2 208 x 2 229 SP1 209 217 SP2 216 x 2 602 x 4 PWB-A2 602 x 4 603 x 4 603 FL 223 226 PWB-E 213 207 x 2 208 x 2 SP3 SP4 216 x
HT-SB60 NO.
HT-SB60 [10] ACTIVE SUBWOOFER PARTS 601 x 4 PWB-C 207 x 2 604 x 2 602 x 2 209 606 x 4 204 PWB-F CORE7 604 202 203 206 205 x 2 PWB-A3 605 x 4 208 201 601 x 4 211 902 210 911 x 4 904 906 903 CORE6 909 x 3 907 SP1 908 603 x 4 910 901 909 x 5 905 15
HT-SB60 NO.
HT-SB60 [11] ACCESSORIES / PACKING PARTS PACKING METHOD (FOR U.K.
HT-SB60 -MEMO- 18
HT-SB60 COPYRIGHT 2012 BY SHARP CORPORATION ALL RIGHTS RESERVED. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of the publisher. SHARP CORPORATION S&O Electronics (Malaysia) Sdn. Bhd.