SHARP 4K UHD Smart TV Quick Start Guide Help SHARP improve the environment by reducing paper
® 2017 Hi sense Company Lid. All Rights Reserved. All material in this Quick Start Guide is the property of Hi sense Company Ltd. and its subsidiaries, and is protected under US and International copyright and/or other intellectual property laws. Reproduction or transmission of the materials, in whole or in part, in any manner, electronic, print, or otherwise, without the prior written consent of Hi sense Company Ltd., is a violation of Hi sense Company Ltd. rights under the aforementioned laws.
Register Your TV! Congratulations on the purchase of your new TV! This Quick Start Guide will walk you through a few easy steps to set up your TV. For detailed instructions, access the User Manual on the support pages listed below. Because we value your business, we want to keep you in the know of "all things SHARP". Using your mobile phone, scan the Registration page QR code to register your TV. Depending on the make and model of your phone, you may need to download a QR code scanning app.
PACKAGED CONTENTS Your package in which you purchased your new TV contains the following items: TV * Quick Start Guide (this document) » 2 base stands ® 4 scows (M4x12) » Power Cord » 1 set of AAA batteries » Remote Control * Important Safety Information and Warranty Card IMPORTANT: To prevent accidentally discarding items that came with your TV, be sure to check ALL of the foam in the carton box.
BUTTONS AND PORTS ON THE TV TV Side View Back View of the Bottom Panel Bottom View EH Prows Input.
STEP 1. Attach the TV Stand or Wall Mount Bracket Attach the TV Stand CAUTION: » Be sure to disconnect the A/C power cord before removing a base stand or installing Wall-Mount brackets. « The screen display is very fragile, and must be protected at all times when installing the base stand. Be sure that no hard or sharp object, or anything that could scratch or damage the screen display, comes into contact with it. DO NOT exert pressure on the front of the TV at any time because the screen could crack.
For 65" 1. Carefully place your TV face-down on a soft, flat surface to prevent damage to the TV or scratching to the screen. 2. Remove the 2 stands from the accessory bag and then insert the stands into the bottom slots of the TV. 3. Use the 4 screws In the accessory bag fo secure the BASE STAND to the TV. NOTE: According to the desktop size, you can select one of the base stand installation, as shown in the figure.
Attach the Wall Mount Bracket (not included) Before you begin the third-party manufacturer instructions, be sure fo do the following things: 1.Place the TV face down on a clean, safe and cushioned surface. 2 Remove the TV stand if you already attached it. 3.Place the spacers (not included} in the corresponding bracket holes. Bracket (not provided) CAUTION: + When you attach the mount, be sure to use the spacers {provided by the third-party manufacturer) between the TV and the bracket.
STEP 2. Connect devices to your TV Check to ensure that you have selected the right cables for the ports and that they are connected securely. Loose connections can affect the quality of the picture image and color. TV label Part able rite Description meal Equipment ANTI CABLE © Connect an outdoor VHF/UHF antenna. HOMO = Pg COMPO. BENT IN Rr VAIN L ®@ 2000808006 | 3 Salter Receiver This 4K TV has two different software versions of HDMI ports to connect HDMI-enabled devices.
label Cable rial Description DIGITAL AUDIO OUT Connect an optical cable from an textual digital audio system. CLAUDIA OUT Connect headphones to hear audio from the ‘Connect an audio adapter (not provided) from an external analog audio system. UsB Conn act a USB 3.0 device to USB 3 to transfer photos, music and movies to your TV at a rate that's 10 times faster than the USB 2.0 port NOTE: You can sill plug a USB 2.0 device Into a USB 3.0 port; however, the rate of speed will not be as fast. USB 3.
STEP 3. Establish a network connection 1.Press the [ 21 button on the remote control, press[ v ] button fo select Settings and then press [OK] to enter the Settings menu. 2.Select Network — Network Configuration. TY JACK External Modem IP Sharer (Router) {ADS /SLAV / Gable TV) {with CPD server) Modem Cable Establish a wired network connection Automatically obtain an IP address 1.Select Ethernet. The TV will automatically obtain an IP address and connect to the network.
Establish a wireless network connection {1 Wireless router with CPD A Wireless LAN Adapter = t= pulthTVset The TV can directly receive network signals via wireless router 1. Selact Wireless. The list of networks will be displayed automatically. 2.Select a wireless network from the list, Input password and select Connect. 3.
Buttons on your TV remote Rawer on / off Enter Channels / input numbers Tum Closed Caption On/Off Live TV Volume {up/down} The bunion for the Quick setup menu D-pad (up/down firefight navigation buttons) Re tum to the previous place In the menu or app Media content control function buttons Quick access buttons to apps — TT Infrared transmitter Change TV input source Quick access buttons to PICTURE/SOUND/ASPECT/SLEEP Dash button Select a dial sub-channel Nuts and restore sound Channel (up/down) Display the H
STEP 4. Begin using your remote 1. Slide the back cover to open the battery compartment of the remote control Gently push and slide Insert the batteries Gently push and slide 2. Insert two AAA size batteries. Make sure to match the and ends of the batteries with the and ends indicated in the battery compartment. 3. Replace the battery compartment cover. Important Information about the remote and batteries + Discard batteries In a designated disposal area. Do not throw them Into a fire.
10178, 10463, 11463, 10748, 11314, 11860, STEP 5. Power on the TV 10171, 11204, 11328, 11517, 11641, 11780, 11785, 11892, 11963, 12002 Plug the power cord into a power outlet. Cox 10178, 1328, 1463 Dish 627, 538, 720, 659 If the code associated with your Cable or Satellite provider is i not listed, does not work or you cannot locate the instructions to program your remote, call your local Cable or Satellite provider's [ customer service center.
Press the Power button on the remote to tum on the TV. A STEP 6. Complete the first-time setup menu splash screen that shows the logo appears. Next, the First-Time Setup Menu begins by prompting you to choose your Language, After the splash screen that shows the logo appears, begin the Country, and Time Zone. first-time setup menu. Task + Using the D-pad mows of your remote, choose your Language, Country and Time Zone. + Choose Decline or Agree, then select Confirm icon and press [OK] lo { ).
Acres Task STEP 7. Begin to enjoy your TV uf primary Select how you receive your TV channels. ‘Your Smart TV is easy to use and brag-worthy! Hpi nous Choose from one of the following sources below. * HDMI * ANT/CABLE Naw that you've completed the first-time setup menu, the Home : A COMPONENT screen is your starting point for navigating the TV. Gone are » NONE the days where your TV only provides ane way for you to be TIP: If you use an antenna to receive channels, entertained.
PRODUCT SPECIFICATIONS Hotel Name Model LC-50P8000U/ Model LC-55P8000U/ Model LC-65P8000U/ Mots] LC-50NS002U Model LC-55N8002U Model LC-65N8002U tension out 5t 44% 25.8% 3.2 Inches 48.5% 28.1 x 33 Inches 57.2% 33 x 3.3 Inches 2H (1118 x 655 x 82 mm) (1233 x 715 x 83 mm) (1452 x 837 27.3 x 8.8 inches 48.5% 29.9 x 9.8 inches 57.2% 34.4 x 12.2 inches (1118 x 694 x 249 mm) (1233 x 760 x 248 mm) (1462 x 876 % 310 mm) ht out St 31.5 Ibs (14.3 kg) 36.8 Ibs (16.7 kg) 56.1 Ibs (25 kg) a 32.21bs (14.6 kg) 37.
QUICK PROBLEM-SOLVING TIPS When you experience an issue with your TV, tum it off and on again. If this does not resolve the problem, then refer to the tips below. If the problem is still not resolved, then contact us at ane of the phone numbers an Page 2. ISSUES POSSIBLE SOLUTIONS +» Check If the power cord Is plugged Into a powered AC outing. + Pres the © Power button on the remote control to activate the unit from ‘Standby’ mode. » Check to sea If the LED light Is on or not.
+ The 'click' sound can occur when the temperature of the television changes. This change causes the television cabinet to expand or contract, which makes the sound. This is normal and the Confirm that TV still has power and is operational. iE renal ol Ines not we + Change the batteries in the remote control. + Check if the batteries are comely installed. Need more help? Additional help Is available online at support links on Page 2.
Certification and Compliance FCC Notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. Tess limits are designed fo provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.