Operation Manual for SSC2489DS

22E
SETTINGS AND DEMO MODES
SETTINGS
In the event that the electrical power supply to your oven should
be interrupted, your current input settings will be erased. Simply
reset the settings once power is reinstated to the oven.
SOUND
At the end of timed cook or touch of the screen, beeps will
sound. The audible signal can be turned off if you prefer quiet
operation. Sound is on by default.
TO TURN SOUND OFF
1 Press SETTINGS.
2 Press SOUND.
3 Press OFF.
4 Press CLEAR to exit.
TO RESTORE SOUND
1 Press SETTINGS.
2 Press SOUND.
3 Press ON.
4 Press CLEAR to exit.
CONTROL LOCK
The Control Lock prevents unwanted oven operation such as by
small children. The oven can be set so that the control panel is
deactivated or locked.
TO LOCK
1 Press SETTINGS.
2 Press CONTROL LOCK.
3 Hold BACK button for 3 seconds.
4 Display shows CONTROL LOCK IS ON.
TO UNLOCK
1 Hold BACK button for 3 seconds.
2 Display shows CONTROL LOCK IS OFF.
3 Press CLEAR to exit.
TEMP
The oven is preset to ˚F. To change, press SETTINGS then
TEMP. Once selection is made, press CLEAR to exit.
DEMO MODE
There are 2 demonstration options available within the Settings
menu for learning more about the SuperSteam+ Oven: Video
Demo and Working Demo.
VIDEO DEMO
Video Demo mode takes you on a guided tour of the Smart
Recipe mode for preparing Lemony Cedar Plank Salmon and
the Smart Cook mode to cook Chicken Drummies/Wingette
Pieces. The video demonstration will continue in a loop until
you press CLEAR to exit.
To enter Video Demo
1 Press SETTINGS.
2 Press DEMO.
3 Press VIDEO DEMO.
4 Press CLEAR to exit.
WORKING DEMO
Working Demo mode allows you to explore and learn the oven’s
different functions and cooking modes while the oven is not
operational in a cooking capacity. Working Demo mode must
be started on the Oven Panel (it cannot be started from the app),
but you may use your smart device to send commands to oven
from the app while the oven is in Working Demo mode. (In
Working Demo, the fan motor will still run, but the oven will
not produce heat.) The DEMO icon will appear on the display
panel until the steps are taken to turn OFF Working Demo mode.
To enter Working Demo Mode
1 At Home Page hold CLEAR until it beeps.
2 Press CLEAR 4 times rapidly.
3 The DEMO icon will appear on the screen.
4 Proceed in DEMO MODE.
To exit Working Demo Mode
1 Repeat steps 1 and 2.
2 The DEMO icon will be removed.
Note:
• Oven does not heat in Demo Mode.
• Display counts down quickly.