Owners Guide
16E
OVEN DISPLAY PANEL OPERATION INACTIVITY NOTE
Condition 1: Non-Interaction with the oven after 20 Minutes
of Initiating Cycle
Any navigation taken on the Oven Display Panel is subject to a
20-minute inactivity countdown.
This simply means that after 20 minutes of non-interaction
with the oven, the Oven Display Panel will return to the HOME
screen (i.e., if the option SMART COOK is touched and no other
interaction is made for 20 minutes, the Oven Display Panel will
default back to the Home screen).
Condition 2: Non-Interaction with the oven after 20 Minutes
upon Preheat Completion
If a Preheat cycle has completed, it is subject to the 20-minute
inactivity countdown if there is no interaction with the oven. This
simply means that after 20 minutes of non-interaction with the
oven, the Oven Display Panel will return to the HOME screen.
However, if after the oven is preheated, the door is opened
and closed, there is a 10-minute inactivity countdown. (Note:
the 10-minute inactivity countdown is only applicable after
preheating and the door has been opened and closed.) If no
interaction with the oven is performed after the opening and
closing of the door after the preheat has completed, the Oven
Display Panel will return to the Home screen.
CONNECTING TO YOUR APPLIANCE
FIRMWARE UPDATES
From time to time, updates to the oven’s software will be
released. Notications will be sent via the SuperSteam+ Oven
app for these updates. The rmware updates will be available
on the product support page. Please visit www.sharpusa.com/
support for more information.
UNPAIRING YOUR DEVICE
To remove the pairing of your smart device with the oven,
perform the following steps in your app:
1 Select Prole.
2 Select My Appliances.
3 Swipe Left over the bar that lists your Sharp SuperSteam+
Oven Default.
4 Press the icon on the right to unpair the oven from the smart
device. This should remove the SuperSteam+ Oven from
your appliances list.