Specifications

1/2/07 CD-SW330H_EN.fm
E-23
TINSZA165AWZZ
ENGLISH
CD-SW330H
Radio
Listening to the radio
Auto power on function:
When you press any of the following buttons, the unit turns on.
z TUNER (BAND) button (main unit and remote control): The unit
turns on and the “TUNER” function is activated.
z / button on the main unit: The unit turns on and playback of
the last function starts (CD, TAPE, TUNER, GAME/VIDEO).
 Tuning
Notes:
z When radio interference occurs, auto scan tuning may stop auto-
matically at that point.
z Auto scan tuning will skip weak signal stations.
z To stop the auto tuning, press the TUNING button again.
z When an RDS (Radio Data System) station is tuned in, the fre-
quency will be displayed first, and then the RDS indicator will light
up. Finally, the station name will appear.
z Full auto tuning can be achieved for RDS stations “ASPM”, see
page 30.
To receive an FM stereo transmission:
Press the TUNER (BAND) button to select stereo mode and “ST”
indicator will be display.
z “ ” will appear when an FM broadcast is in stereo.
z If the FM reception is weak, press the TUNER (BAND) button to
extinguish the “ST” indicator. The reception changes to monaural,
and the sound becomes clearer.
1 Press the ON/STAND-BY button to turn the power on.
2 Press the TUNER (BAND) button repeatedly to select the
desired frequency band (FM or AM).
3 Press the TUNING ( or ) button to tune in to the desired
station.
Manual tuning:
Press the TUNING button as many times as required to tune in
to the desired station.
Auto tuning:
When the TUNING button is pressed for more than 0.5 sec-
onds, scanning will start automatically and the tuner will stop at
the first receivable broadcast station.
FM stereo mode indicator
FM stereo receiving indicator