Specifications

1/2/07 CD-SW330H_EN.fm
E-25
TINSZA165AWZZ
ENGLISH
CD-SW330H
Tape Playback
Listening to a cassette tape (TAPE 1 or TAPE 2)
 Tape playback
Auto power on function:
When you press any of the following buttons, the unit turns on.
z TAPE button (main unit and remote control): The unit turns on and
the “TAPE” function is activated.
z TAPE button on the remote control: The unit turns on and play-
back starts (regardless of the last function).
z / button on the main unit: The unit turns on and playback of
the last function starts (CD, TAPE, TUNER, GAME/VIDEO).
Auto power off function:
In the stop mode of tape operation, the main unit enters the stand-by
mode after 15 minutes of inactivity.
Before playback:
z For playback, use normal or low-noise tapes for
the best sound. (Metal or CrO tapes are not
recommended.)
z Do not use C-120 tapes or poor-quality tapes, as
they may cause malfunctions.
z Before loading a tape into the cassette compartment,
tighten the slack with a pen or a pencil.
1 Press the ON/STAND-BY button to turn the power on.
2 Open the cassette com-
partment by pushing the
area marked “ ”.
3 Load a cassette into the
TAPE 1 compartment or
TAPE 2 compartment with
the side to be played
facing towards you.
4 Press the TAPE (1 2) button to select the cassette you
want to listen to.
5 Press the / (TAPE )
button to start playback.
Tape play indicator