User guide

Settings 101
Setting the Display
You can change the settings of the main and sub displays.
Setting the Main Display
Wallpaper
For the standby screen, 3 default pictures are provided.
Pictures taken with the digital camera or images downloaded
from a WAP site can be used for wallpapers.
Setting from Picture Gallery
“Settings”
→ “Display Settings” → “Wallpaper”
1. Select “Picture Gallery”.
2. Select the desired picture.
3. After displaying the picture, press B.
Note
• Some pictures cannot be used because of their picture and
data types.
• If the picture in Picture Gallery is already set, it is displayed
in step 1. Press [Change] and select the desired picture.
Assigning the Pictures
Pictures can be displayed when turning the power on or off,
when receiving an incoming call, or when operating the alarm.
Pictures taken with the digital camera or images downloaded
from a WAP site can be used.
To Set Built-in Pictures
“Settings”
→ “Display Settings” → “Assign Pictures”
1. Select the desired scene to set the picture to.
Select “Pattern 1”, “Pattern 2” or “Pattern 3” when you
select “Incoming” or “Alarm”.
To Set Saved Pictures
“Settings” → “Display Settings” → “Assign Pictures”
1. Select the desired scene to set the picture to.
2. Select “Picture Gallery”.
3. Select the desired picture.
4. After displaying the picture, press B.
5. Specify the area you wish to display using the navigation
keys.
Note
• Some pictures cannot be used because of their picture and
data types.
• If the picture in Picture Gallery is already set, it is displayed
in step 2. Press [Change] and select the desired picture.
(M 9-2)