User guide

138 Connectivity
To Turn the Authentication Request On or Off
You can request the sender or receiver of the data to
authenticate the passcode (exchanging the passcode) before
pairing devices.
“Connectivity”
→ “Bluetooth” → “Bluetooth Settings”
→ “Authentication”
1. Select “On” or “Off”.
Note
• No authentication is required for the paired devices.
• Even if you select “Off”, you may authenticate the passcode
when the sender requests it.
To See Your Phone Details
“Connectivity”
→ “Bluetooth” → “Bluetooth Settings”
→ “My Phone Details”
Mass Storage
You can set the phone to connect to a PC via Mass Storage
mode.
“Connectivity”
→ “Mass Storage”
1. Press [Yes].
Note
• Activating Mass Storage mode also activates offline mode.
• Mass Storage is not available when the battery is low, a
Java™ application is paused, Music Player is active, or a
memory card is not inserted in your phone.
USB Charge
You can set the phone to charge via USB, connected to a PC.
“Connectivity”
→ “USB Charge”
1. Select “Enable” or “Disable”.
Card Settings
Formatting Memory Card
“Connectivity”
→ “Card Settings” → “Format Card”
1. Enter your handset code.
For details on the handset code, see “Changing the
Handset Code” on page 129.
2. Press [Yes] to start formatting.
(M 12-2)
(M 12-3)
(M 12-4)